Issue 46, 2023

Reply to the ‘Comment on “Enhancing the output performance of hybrid nanogenerators based on Al-doped BaTiO3 composite films: a self-powered utility system for portable electronics”’, by A. Tkach and O. Okhay, J. Mater. Chem. A, 2023, 11, D3TA01041D

Abstract

With this contribution, we reply to the Comment by Tkach et al. on our publication in J. Mater. Chem. A, 2018, 6, 16101. We provide proper evidence to clarify all these queries either by providing a further explanation or through additional experimental results. From the ferroelectric characteristics and dielectric studies, we demonstrate that the remnant polarization and dielectric constant of BaTiO3 are varied with the aluminum (Al) dopant concentration and also noticed that the BaTiO3 with 2% Al dopant concentration is an optimized sample (compared to the others) to attain a high remnant polarisation and dielectric constant. Besides, the other material data of the samples are further analyzed and the presence of Al dopant content is confirmed in the BaTiO3.

Graphical abstract: Reply to the ‘Comment on “Enhancing the output performance of hybrid nanogenerators based on Al-doped BaTiO3 composite films: a self-powered utility system for portable electronics”’, by A. Tkach and O. Okhay, J. Mater. Chem. A, 2023, 11, D3TA01041D

Associated articles

Article information

Article type
Comment
Submitted
26 May 2023
Accepted
04 Oct 2023
First published
14 Nov 2023

J. Mater. Chem. A, 2023,11, 25759-25764

Reply to the ‘Comment on “Enhancing the output performance of hybrid nanogenerators based on Al-doped BaTiO3 composite films: a self-powered utility system for portable electronics”’, by A. Tkach and O. Okhay, J. Mater. Chem. A, 2023, 11, D3TA01041D

B. Dudem, L. K. Bharat, H. Patnam, A. R. Mule and J. S. Yu, J. Mater. Chem. A, 2023, 11, 25759 DOI: 10.1039/D3TA03122E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements