Issue 22, 2023

A molecularly imprinted fiber array solid-phase microextraction strategy for simultaneous detection of multiple estrogens

Abstract

A kind of selective enrichment material based on a homemade molecularly imprinted polymer (MIP) fiber array with high adsorption capacity was developed for the accurate analysis of estrogens in food samples. Here, the MIP with 17β-estradiol as the template was obtained by in situ polymerization. The chemical composition, morphologies, surface area, and pore size of the polymer were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller theory. The extraction time, desorption solvent, desorption time, ionic strength, and the pH of solution were investigated to ascertain the best extraction conditions. Under the optimal extraction conditions, three fiber coatings of 17β-estradiol MIP and commercial polyacrylate (PA) were bound to a homemade handle to assemble the fiber array, respectively. The findings showed that the three-fiber array of the MIP significantly improved the extraction capacity by 145 times compared to PA. The MIP fiber array showed high adsorption capacity for the template molecule 17β-estradiol and its structural analogues estrone, bisphenol F, bisphenol B, and bisphenol A, with enrichment factors of 99.60–133.16. A molecularly imprinted polymer solid-phase microextraction fiber array (MIP-SPME fiber array) coupled with high-performance liquid chromatography-diode array detection was used for the analysis and detection of the five estrogens in milk and yogurt samples. Satisfactory recoveries were achieved ranging from 74.75–119.41% with <9.42% relative standard deviations. The developed method for the simultaneous determination of trace estrogens in food samples exhibited a limit of detection of 0.33 μg L−1. The MIP-SPME fiber array provided an available strategy for improving the selectivity and adsorption capacity of SPME for trace target component analysis in complex matrices and increasing the sensitivity of the analytical method.

Graphical abstract: A molecularly imprinted fiber array solid-phase microextraction strategy for simultaneous detection of multiple estrogens

Supplementary files

Article information

Article type
Paper
Submitted
17 Mar 2023
Accepted
09 May 2023
First published
11 May 2023

J. Mater. Chem. B, 2023,11, 4991-4999

A molecularly imprinted fiber array solid-phase microextraction strategy for simultaneous detection of multiple estrogens

Q. Zhou, Y. Duan, Z. Xu, Y. Tian, Z. Liu, C. Liu, P. He, Z. Liu and X. Si, J. Mater. Chem. B, 2023, 11, 4991 DOI: 10.1039/D3TB00555K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements