Issue 18, 2024

Confined phase transition triggering a high-performance energy storage thermo-battery

Abstract

A thermoelectric device can directly convert heat to electricity, but its operation requires a temperature difference between the two electrodes of the thermocell. Unfortunately, the potential difference between the two electrodes disappears when there is no temperature difference, which greatly limits the practical conditions for power electronic devices. Here, we first report the utilization of thermo-responsive hydrophobic interactions to obtain a high-performance thermo-battery with a certain electrical storage capacity and achieve a thermoelectric device that can still supply power in the absence of heat input. In I/I3 aqueous solution containing methyl cellulose (MC), the I3 concentration gradient caused by the hydrophobic association effect and the low/high entropy electrolyte transition caused by the confinement of bacterial cellulose (BC) not only enabled the thermo-battery to exhibit high thermoelectric performance (1.75 and −6.84 mV K−1), but also, most surprisingly, the thermal voltage could be slowly self-discharged for about 312 hours (from −164.4 to −29.0 mV) when the temperatures at the hot- and cold-terminal electrodes are almost equal. This is the first discovery of rechargeable battery behavior in the field of thermoelectricity, which opens up new developments in thermocells at a deeper level.

Graphical abstract: Confined phase transition triggering a high-performance energy storage thermo-battery

Supplementary files

Article information

Article type
Paper
Submitted
31 Mar 2024
Accepted
30 Jul 2024
First published
01 Aug 2024

Energy Environ. Sci., 2024,17, 6606-6615

Confined phase transition triggering a high-performance energy storage thermo-battery

J. Li, S. Chen, X. Qu, Z. Han, Z. Zhou, L. Deng, Y. Jia, S. Zhang, R. Xie and H. Wang, Energy Environ. Sci., 2024, 17, 6606 DOI: 10.1039/D4EE01435A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements