Issue 1, 2024

Direct ink writing of polyimide aerogels for battery thermal mitigation

Abstract

Aerogels, which are ultralightweight and highly porous materials, are excellent insulators with applications in thermal management, acoustic impedance, and vibration mitigation. Aerogels have huge potential in the aerospace industry as a lightweight solution for thermally insulating electronic components which are confined within a small volume. However, the application of aerogels is currently hampered by the primary processing method of molding, which is costly, time-consuming, requires tooling, and limits geometric complexity. The extrusion-based 3D printing method of direct ink writing (DIW) provides an avenue to move past these constraints. However, rheology modifying additives are commonly used to make a sol printable, which may negatively impact the performance of the product aerogel. Here, we report the DIW of pure polyimide aerogels by subjecting the sol to mild heating (60 °C for 5 min) to promote gelation and produce a printable ink. This approach yielded printed aerogels with comparable microstructural, mechanical, and thermal properties to cast aerogels. The printed aerogel is stable up to 500 °C and has potential for high temperature applications relevant to the aerospace industry. We highlight the utility of this system by printing a bespoke enclosure to insulate a heating plate as a model for batteries; even at a plate temperature of 120 °C, the surface of the 8 mm thick aerogel maintained ambient temperature, indicating excellent inhibition of heat transfer. Additionally, a printed aerogel casing for a solid-state electrolyte coin cell battery resulted in a tenfold increase in ionic conductivity sustained for 100 min. This novel, simple method for 3D printing aerogels opens exciting opportunities to move beyond the geometric limitations of molding to expand the application space of these ultralightweight materials.

Graphical abstract: Direct ink writing of polyimide aerogels for battery thermal mitigation

Supplementary files

Article information

Article type
Paper
Submitted
11 Oct 2023
Accepted
07 Dec 2023
First published
13 Dec 2023
This article is Open Access
Creative Commons BY-NC license

RSC Appl. Polym., 2024,2, 71-86

Direct ink writing of polyimide aerogels for battery thermal mitigation

C. E. Cipriani, D. A. Dornbusch, S. L. Vivod and E. B. Pentzer, RSC Appl. Polym., 2024, 2, 71 DOI: 10.1039/D3LP00200D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements