Issue 6, 2024

Photocatalytic methanol oxidation to formaldehyde in a continuous laboratory plant over Aeroxide P25

Abstract

We here report the photochemical synthesis of formaldehyde by gas phase methanol oxidation with oxygen in a sophisticated continuous laboratory setup. The commonly used benchmark photocatalyst Evonik Aeroxide P25 was applied in combination with a narrow peak UV-A LED light source. Prior to its use, the applied powder catalyst was immobilized with a simple spray coating technique to a steel plate support (300 mm × 130 mm × 20 mm). With this system, reaction engineering studies have been carried out to elaborate the dependencies of catalyst mass, irradiation, residence time and temperature on achieved conversions, selectivities, yields, reaction rates, and apparent quantum efficiencies. We found that catalyst load influences conversion in an extended plateau like manner. High irradiation and residence time benefit MeOH conversion while the selectivity for HCHO decreases with both parameters. Temperature showed an interesting influence, as it increases both conversion and selectivity, until desorption effects become dominating over 120 °C. Our work thus for the first time provides application relevant information for an industrial highly interesting reaction and a heavily researched model photocatalytic system that has so far been mainly studied under surface science conditions.

Graphical abstract: Photocatalytic methanol oxidation to formaldehyde in a continuous laboratory plant over Aeroxide P25

Supplementary files

Article information

Article type
Paper
Submitted
25 Sep 2023
Accepted
08 Feb 2024
First published
14 Feb 2024

React. Chem. Eng., 2024,9, 1462-1473

Photocatalytic methanol oxidation to formaldehyde in a continuous laboratory plant over Aeroxide P25

F. Stubenrauch, M. Schörner, A. Bösmann, P. Schühle and P. Wasserscheid, React. Chem. Eng., 2024, 9, 1462 DOI: 10.1039/D3RE00503H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements