Directional drying of a colloidal dispersion: quantitative description with water potential measurements using water clusters in a poly(dimethylsiloxane) microfluidic chip

Abstract

We have developed a poly(dimethylsiloxane) (PDMS) microfluidic chip to study the directional drying of a colloidal dispersion confined in a channel. Our measurements on a dispersion of silica nanoparticles once again revealed the phenomenology commonly observed for such systems: the formation of a porous solid with linear growth in the channel at short times, slowing down at longer times as the evaporation rate decreases. The growth of the solid is also accompanied by mechanical stresses that are released by the delamination of the solid from the channel walls and the formation of cracks. In addition to these observations, we report original measurements using hydrophilic filler in the PDMS formulation used (Sylgard-184). When the PDMS matrix is in contact with water, water molecules pool around these hydrophilic sites, resulting in the formation of microscopic water clusters whose size depends on the water potential ψ. In our work, we have used these water clusters to estimate the water potential profile in the channel as the porous solid grows. Using a transport model that also takes into account solid delamination in the channel, we then linked these water potential measurements to the hydraulic permeability of the porous solid. These measurements finally enabled us to show that the slowdown in the evaporation rate is due to the invasion of the porous solid by air/water nanomenisci at a critical capillary pressure ψ_cap.