Issue 25, 2024

Near room temperature multilevel resistive switching memory with thin film ionic liquid crystals

Abstract

In this study, we demonstrate multilevel operation of nonvolatile resistive random-access memory (ReRAM) devices using thin films of an ionic liquid crystal (ILC), 1-dodecyl-3-methylimidazolium tetrafluoroborate ([C12mim][BF4]), as a resistive switching layer. The present ILC-based ReRAM devices exhibit bipolar resistive switching behavior between the high resistance state (HRS) and the low resistance state (LRS) in the SmA phase of [C12mim][BF4] at near-room-temperature (30 °C) with an endurance of over 50 cycles and retention up to 2000 s. The observed resistive switching behavior of the device is caused by the formation and rupture of conductive filaments composed of trapped charges in the [C12mim][BF4] thin film, where the current conduction at the LRS follows the space charge limited current mechanism. Furthermore, multilevel resistive switching is achieved by controlling the voltage sweep rate and the reset voltage during the voltage sweep with stable endurance and reversibility. These findings indicate that ILC-based ReRAM devices have potential for application not only as next-generation information storage devices but also as neuromorphic devices owing to their multilevel resistive switching function.

Graphical abstract: Near room temperature multilevel resistive switching memory with thin film ionic liquid crystals

Supplementary files

Article information

Article type
Paper
Submitted
28 Feb 2024
Accepted
22 May 2024
First published
23 May 2024
This article is Open Access
Creative Commons BY-NC license

J. Mater. Chem. C, 2024,12, 9321-9327

Near room temperature multilevel resistive switching memory with thin film ionic liquid crystals

W. Zhang, S. Maruyama, K. Kaminaga and Y. Matsumoto, J. Mater. Chem. C, 2024, 12, 9321 DOI: 10.1039/D4TC00796D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements