Issue 16, 2013

A rapid electrochemical biosensor based on an AC electrokinetics enhanced immuno-reaction

Abstract

Fluorescent labelling and chromogenic reactions that are commonly used in conventional immunoassays typically utilize diffusion dominated transport of analytes, which is limited by slow reaction rates and long detection times. By integrating alternating current (AC) electrokinetics and electrochemical impedance spectroscopy (EIS), we construct an immunochip for rapid, sensitive, and label-free detection. AC electroosmosis (ACEO) and positive dielectrophoresis (DEP), induced by a biased AC electric field, can rapidly convect and trap the analyte onto an EIS working electrode within a few minutes. This allows the change of electron-transfer resistance (ΔRet) caused by the antibody–antigen (IgG–protein A) binding to be measured and quantified in real time. The measured impedance change achieves a plateau after electrokinetic concentration for only 90 s, and the detection limit is able to reach 200 pg ml−1. Compared to the conventional incubation method, the electrokinetics-enhanced method is approximately 100 times faster in its reaction time, and the detection limit is reduced by 30 times. The ΔRet of the positive response is two orders of magnitude higher than the negative control, demonstrating excellent specificity for practical applications.

Graphical abstract: A rapid electrochemical biosensor based on an AC electrokinetics enhanced immuno-reaction

Supplementary files

Article information

Article type
Paper
Submitted
25 Jan 2013
Accepted
13 May 2013
First published
15 May 2013

Analyst, 2013,138, 4656-4662

A rapid electrochemical biosensor based on an AC electrokinetics enhanced immuno-reaction

I. Cheng, H. Yang, C. Chung and H. Chang, Analyst, 2013, 138, 4656 DOI: 10.1039/C3AN00190C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements