Nicholas J.
Race
,
Ian R.
Hazelden
,
Adele
Faulkner
and
John F.
Bower
*
School of Chemistry, University of Bristol, Bristol, BS8 1TS, UK. E-mail: john.bower@bris.ac.uk
First published on 20th June 2017
Aza-Heck cyclizations are an emerging method for the construction of chiral N-heterocyclic systems. In these processes, an activated N–O bond replaces the C–X bond (X = halide, OTf) used in conventional Heck reactions, with the associated aza-Pd(II)-intermediate engaging pendant alkenes in a Heck-like manner. This perspective article commences with an historical overview of the area, which stems from Narasaka's seminal studies using oxime esters as the initiating motif. The scope and mechanism of associated chiral N-heterocyclic methodologies are then outlined, including cascade processes that enable diverse alkene 1,2-carboaminations. The recent emergence of new N–O donors and the realization of highly enantioselective aza-Heck cyclizations are then discussed. Collectively, these studies suggest that the aza-Heck approach can underpin a broad family of redox-neutral and enantioselective C–N bond forming processes.
In this perspective, we highlight the emerging area of aza-Heck reactions for the synthesis of chiral nitrogen heterocycles. Here, an activated N–O bond replaces the C–X bond (X = halide, OTf) used in conventional Heck reactions, with the resulting aza-Pd(II) intermediates mimicking the reactivity of their aryl-Pd(II) counterparts (Scheme 1). In general terms, aza-Heck reactions can be considered complementary to more well-established aza-Wacker processes that require an external oxidant.4 However, as will be seen, the use of an N–O bond as the internal oxidant can confer several synthetic and mechanistic advantages. The following discussion highlights key historical developments in aza-Heck chemistry before focussing on the scope and mechanism of methodologies that provide chiral heterocyclic systems.
Following Narasaka's initial report, a variety of related heteroaromatic methodologies emerged (Scheme 3). A key feature of all of these approaches is that the oxime ester substrates are readily available from the corresponding ketones, which, in turn, can be accessed using well-established carbonyl chemistry (Scheme 3A). In most cases, O-pentafluorobenzoyl oxime esters are required, although processes that exploit oxidative addition into the N–O bond of O-phosphinyl oxime esters11 or the N–N bond of N,N,N-trimethylhydrazonium salts have also been developed.12N-Chloroamines have also been suggested as suitable initiating motifs, although subsequent studies suggest that cyclization of such systems proceeds via a radical-based pathway.13
A representative outline of heteroaromatic compounds accessible via the Narasaka–Heck reaction is presented in Scheme 3B. Pyridines 5 can be accessed by 6-endo cyclization of oxime esters 4; here, chloride additives such as LiCl and n-Bu4NCl were found to play a crucial role.14 Abell and co-workers showed that amidoxime esters 6 cyclize to afford imidazoles 7, thereby demonstrating the viability of N–O oxidative addition beyond oxime ester substrates.15 In conformationally constrained cases, 6-exo cyclizations are feasible; for example, isoquinolines 9 can be accessed by aza-Heck cyclization of precursors 8.16 Other classes of acceptor can also be exploited. For example, cyclization onto pendant cycloheptatrienes generates aza-azulenes after in situ oxidation of the initial aza-Heck adduct (10 to 11).17
The processes discussed so far use the Narasaka–Heck reaction to generate new C(sp2)–N bonds,18 rendering these approaches ideally suited to the synthesis of N-heteroaromatic compounds. Given the increasing importance of chiral N-heterocycles in the pharmaceutical industry,2 generalization of aza-Heck manifolds to the formation of (stereodefined) C(sp3)–N bonds is particularly appealing. The remainder of this Perspective highlights recent aza-Heck methodologies that use N–O bonds to generate chiral nitrogen heterocycles.19 As will be seen, processes that initiate at the N–O bond of oxime esters, as used in the original Narasaka process, have received the most attention. However, recent reports have exploited other redox active N–O donors, such that N-(pentafluorobenzoyloxy)sulfonamide20 and O-phenyl hydroxamates21 are now viable initiating motifs for aza-Heck cyclizations (Scheme 4).
With the aim of developing a general aza-Heck methodology involving cyclic alkenes, oxime ester 14 was used as a model substrate (Scheme 6A).22 Extensive investigations revealed that efficient cyclization to 15 was possible, but only when electron-deficient phosphine ligands were used. By far the most effective subset of ligands were fluorinated triarylphosphines, with P(3,5-(CF3)2C6H3)3 emerging as the optimal system (Scheme 6B). This ligand allowed cyclization of 14 to proceed in 93% yield at 60 °C with 5 mol% Pd loading. Highly electron-deficient phosphine ligands, such as P(C6F5)3 were not effective and low conversions were observed, likely due to slow N–O oxidative addition. However, within the effective ligand range outlined in Scheme 6B, oxidative addition does not appear to be rate limiting such that the choice of ligand is dictated by the efficiency of steps later in the cycle. Interestingly, bulky electron-rich phosphine ligands, such as those typically employed in conventional Heck reactions (where oxidative addition is often rate limiting), are not effective and lead to a different mechanistic pathway (vide infra).
The beneficial effects of P(3,5-(CF3)2C6H3)3 are consistent with stoichiometric studies by Hartwig and co-workers, who demonstrated that migratory insertion of alkenes into Pd-NPh2 bonds is facilitated by bulky and/or electron-deficient ligands.24 An additional key factor for the conversion 14 to 15 resides in suppression of protodepalladation of imino-Pd intermediate 16. Electron-deficient phosphine ligands are expected to increase σ-donation from the imino moiety, which, in turn, should suppress competing protonation of this unit. Indeed, under unoptimized conditions, protodepalladation dominates, leading to ketone by-product 19, likely via the intermediacy of hydrolytically sensitive NH imine 18.
Also of considerable importance for the cyclization of 14 to 15 is the pentafluorobenzoate leaving group. This activating group was introduced in Narasaka's seminal publication as a result of empirically driven studies;5 substrates of this type were found to offer the best balance of starting material stability and catalytic activity. With respect to the former aspect, the key issue is suppression of competing Beckmann rearrangement of the starting material, which becomes problematic when more polarizing activating groups (e.g. O-sulfonyl groups) are used. Nevertheless, the requirement of a pentafluorobenzoate leaving group for the cyclization of 14 was striking given that Uemura and co-workers have shown that facile oxidative addition of Pd(0) into the N–O bond of less polarized O-benzoyl oximes can be used to trigger β-carbon eliminations.25 Note that the Uemura process does not involve alkene imino-palladation, suggesting a critical role for the leaving group on the efficiency of this step in aza-Heck reactions.
Investigations aimed at understanding the efficiencies of different leaving groups (in particular pentafluorobenzoate vs. benzoate) revealed that, for the cyclization of 14 to 15, addition of exogenous C6F5CO2H or C6H5CO2H decreases both the reaction rate and yield.26 Furthermore, halide additives, such as n-Bu4NCl, completely suppress aza-Heck cyclization. These studies suggest that, for efficient cyclization, the leaving group must dissociate after oxidative addition to provide cationic imino-Pd(II) intermediate 17 (Scheme 6A). Relatively electron-rich carboxylates, such as benzoate, do not dissociate readily, resulting in less efficient cyclization of 14 and increased levels of protodepalladation at the stage of imino-Pd(II) intermediate 16. 19F NMR studies revealed a surprising additional benefit of the pentafluorobenzoate leaving group. It was found the interaction of this by-product with protonated triethylamine, which is generated by deprotonation of the Pd-hydride species released upon β-hydride elimination, results in facile protodecarboxylation to C6F5H. This process removes otherwise inhibitory pentafluorobenzoate from the reaction system, such that equilibrium access to cationic imino-Pd(II) intermediate 17 is maintained in subsequent cycles. In favorable cases, the protodecarboxylation process allows substoichiometric (catalytic) quantities of Et3N to be used. Thus, efficient aza-Heck cyclization is dependent on both a pentafluorobenzoate leaving group and an electron-deficient phosphine. A complete mechanistic picture of the aza-Heck cyclization of 14 to 15, as discussed above, is outlined in Scheme 7.
The conditions optimized for 14 proved to be generally applicable for 5-exo aza-Heck cyclizations onto cyclic alkenes (Scheme 8).22 Indeed, a variety of aryl-, alkyl-, and heteroaryl-substituted oxime esters underwent efficient aza-Heck reaction to give the corresponding cis-fused bicyclic N-heterocycles in high yield (Scheme 8A). Cyclic alkenes of different ring sizes were also tolerated, as well as systems with substitution at C2 of the oxime ester. Interestingly, oxime ester 20a, which possesses a non-defined α-stereocenter, underwent stereoconvergent cyclization to generate bicyclic system 21a in high diastereopurity; a similar result was observed for 21b (Scheme 8B). Presumably, initial cyclization of both diastereomers is followed by equilibration (via the enamine) to the thermodynamically favored product, wherein the R2-substituent resides on the less hindered face of the dihydropyrrole ring.
An inherent consequence of using the Narasaka–Heck cyclization to generate C(sp3)–N bonds is that the product contains imine and alkene units for further derivatization. Oxime ester (R)-14 (93% e.e.) underwent diastereoselective aza-Heck cyclization to afford N-heterocycle (3aR,7aS)-15 without loss of enantiomeric purity (Scheme 9). Further manipulation of this product via the imine and alkene afforded complex bicyclic system 22 with high levels of control for all five stereocenters. The sequence in Scheme 9 demonstrates the power of aza-Heck methodology for the formation of complex, chiral N-heterocycles.
Further studies sought to investigate the scope of the Pd2(dba)3/P(3,5-(CF3)2C6H3)3 catalyst system with respect to other classes of alkene acceptor. It was found that cyclizations of oxime esters with 1,1-disubstituted alkenes (Scheme 10) provides a general entry to α,α-disubstituted systems 24.27 Here, 5-exo cyclization of 23 generates alkyl-Pd(II) intermediate 25, which can only undergo β-hydride elimination via C7–H to deliver chiral product 24. The process tolerates sterically and electronically diverse substituents at R1 and R2, providing an efficient approach to challenging tetra-substituted nitrogen-bearing stereocentres. Ultimately, this study served as the basis for the development of enantioselective variants, as described later.
In the studies outlined above, which involve cyclic or 1,1-disubstituted alkenes, the nature of the alkene acceptor enforces the formation of chiral products (new C(sp3)–N bond). For processes involving 1,2-disubstituted alkenes, 5-exo cyclization generates alkyl-Pd(II) intermediate 27, from which β-hydride elimination can occur via either Ha or Hb (Scheme 11). The former pathway leads to pyrrole products; Narasaka has shown that cyclisation of 26 using Pd(PPh3)4 affords pyrrole 28 with 8:1 selectivity over dihydropyrrole 29 (73% combined yield).5
To provide selectivity for chiral products in processes involving 1,2-disubstituted alkenes, strategic installation of an aryl ring at R2 was explored (Scheme 12).28,29 This approach proved effective, such that a variety of dihydropyrroles 31a–e were generated from oxime esters 30a–e with high selectivity over the corresponding pyrroles 32a–e. For systems with substitution at C4 (e.g.31e) good levels of 1,2-diastereocontrol were observed, whereas C3-methyl substituted product 31d was formed in low diastereoselectivity. Gratifyingly, extension of the method to systems where R2 = alkyl also resulted in selective formation of chiral products (e.g.30f to 31f). Here, studies on the effects of different ligands revealed that the relatively wide cone angle of P(3,5-(CF3)2C6H3)3 is responsible for preferential β-hydride elimination via Hb.
Scheme 12 Aza-Heck cyclizations of oxime esters with 1,2-disubstituted alkenes; the ratio of dihydropyrrole 31:pyrrole 32 is shown in brackets below the isolated yield of pure 31. |
The dihydropyrrole products accessed in Scheme 12 are ideally suited to diastereoselective manipulations (Scheme 13). Indeed, hydrogenation of the imine of 31a afforded pyrrolidine 33 in 95% yield and 10:1 d.r. Similarly, allyl addition (allylMgCl) to 31a occurred from the less hindered face of the imine to provide 34 in high diastereoselectivity (>20:1 d.r.). Bicyclic systems common to many indolizidine alkaloids can also be constructed. For example, DIBAL-H reduction of the imine of 31a was followed by N-butenylation and ring-closing metathesis to afford bicyclic system 35 in high diastereopurity. More stereochemically complex aza-Heck products can also be manipulated, with DIBAL-H reduction of 31e occurring from the face opposite the C2-substituent to provide complex pyrrolidine 36 in >20:1 d.r.
Overall, the ligand effects revealed during our studies highlight important factors that may impact other processes involving oxidative addition of Pd(0) into the N–O bond of oxime esters. Specifically, it appears that electron-neutral or electron-poor Pd(0)-systems undergo N–O oxidative addition via a concerted two-electron redox process, whereas electron-rich Pd-systems can deviate into a SET pathway. For the process in Scheme 14, this pathway is interrupted by fast cyclization of the iminyl radical onto the pendant alkene. In systems without an alkene acceptor, stoichiometric studies from the groups of Hartwig9 and Stahl10 have shown that electron-rich Pd-systems (e.g. Pd(0)/PCy3) lead to imino-Pd(II) intermediates. In these cases, it is possible that SET oxidative addition is operative. The mechanistic divergence observed for different phosphine ligands during N–O oxidative addition is reminiscent of the substrate dependent mechanistic divergence often observed for oxidative addition of Pd(0) into aryl iodides vs. alkyl iodides (concerted vs. SET).31
In Scheme 14B, iminyl radical cyclization leads to products lacking an alkene. However, under copper-catalyzed conditions we have found that Heck-like products (i.e. those with an alkene) can be accessed using iminyl radical-based cyclizations (Scheme 15).13b,33 This finding is significant as it allows the replacement of a rare-earth transition metal catalyst with an isoelectronic first-row system. Our studies in this area were inspired, in part, by reports from Liebeskind and co-workers, who harnessed copper-based systems to activate the N–O bonds of oxime esters.34 Under optimized conditions, Cu(2-ethylhexanoate)2-catalyzed cyclization of a range of pivaloyl oxime esters 42 occurs in good to excellent yields (Scheme 15A). The reaction tolerates cyclic, 1,1-disubstituted and 1,2-disubstituted alkenes, demonstrating similar scope to the aforementioned Pd-catalyzed protocols. For comparative purposes, the yields obtained for Pd-catalyzed aza-Heck cyclization of the corresponding O-pentafluorobenzoyl oxime ester are included in Scheme 15A. Mechanistic studies suggest that Cu(I)-carboxylate (generated in situ) induces N–O homolysis of oxime ester 42a, with the resulting iminyl radical cyclizing to alkyl radical 43 (Scheme 15B). Cu(II)-carboxylate then traps 43 to generate alkyl-Cu(III) intermediate 44. As supported by studies from Kochi and co-workers,35 alkyl-Cu(III) intermediate 44 then undergoes oxidative elimination, via transition state 45, to afford product 29 with concomitant regeneration of the active Cu(I)-catalyst.
In the event, the approach outlined in Scheme 16B was successful, providing efficient access to a diverse array of heterocyclic ring systems (Scheme 17). The optimized catalyst system is the same as that described earlier, with fine-tuning of reaction solvent required on a case-by-case basis. Notable features of the process include: (a) selective β-hydride elimination away from nitrogen for cyclizations involving 1,2-disubstituted alkenes (e.g.57a–b), (b) excellent diastereoselectivities for cyclizations of substrates bearing substituents α to nitrogen (e.g.57c–d) and (c) the ability to promote challenging 6-exo cyclizations (e.g.57f). Furthermore, transannular cyclizations are also possible; cyclization of 58 provide tropane ring system 59 in high yield. Mechanistic studies support a reaction pathway analogous to the Narasaka–Heck reaction (see Scheme 7), with protodecarboxylation of the pentafluorobenzoate leaving group once again playing a key role.
Conceptually, the approach outlined in Scheme 16B is of broader interest because it uses sulfonamides 55 as bifunctional amino reagents. Specifically, the Mitsunobu step exploits the nucleophilic character of 55, whereas the Pd-catalyzed aza-Heck step harnesses the electrophilic reactivity of the N–O bond. As such, further nucleophilic–electrophilic sequences could be envisaged with 55, perhaps leading to a diverse array of methodologies. Studies towards this broad goal are ongoing.
Recently, Watson and co-workers reported a third distinct class of aza-Heck reaction, based on cyclizations of O-phenyl hydroxamates 60 (Scheme 18).21 The choice of an O-phenyl leaving group was crucial for efficient cyclization, as it suppressed competing Lossen rearrangement of 60. Optimized conditions employ a Pd-system modified with the highly electron deficient phosphite P(OCH2CF3)3. Using this system, 5-exo cyclizations involving a wide range of di-, tri- and tetra-substituted alkenes were all effective, providing the targets in moderate to excellent yields. 6-Exo cyclizations are also achievable but require conformationally predisposed substrates (e.g.61f). Note that a secondary O-phenyl hydroxamate is required (R(CO)NHOPh), and N-alkylated systems are not tolerated. The proposed mechanism closely follows those outlined already, with oxidative addition of Pd(0) into the N–O bond of 60 occurring in advance of syn-stereospecific alkene amino-palladation; a series of experiments supported this latter proposition. In contrast to the processes described earlier, it is unclear whether or not this class of aza-Heck cyclization occurs via a cationic aza-Pd intermediate. Indeed, compared to pentafluorobenzoate, phenoxide is expected to dissociate much less readily, such that in the Watson process cyclization likely occurs in “neutral mode”.
The processes outlined in Schemes 17 and 18 could also potentially be achieved using an aza-Wacker approach, wherein the allylic amine targets are generated by Pd(II)-catalyzed cyclization of an NH nucleophile with an alkene under oxidative conditions.4 Although often efficient, this approach suffers from several limitations. For example, few cyclizations of primary amides are known under aza-Wacker conditions (cf.Scheme 18),36 highlighting an inherent limitation of the method. With respect to aza-Wacker cyclizations involving NH-sulfonamides (cf.Scheme 17): large α-substituents are not tolerated (cf.57d), hindered acyclic olefins do not participate (cf.57d) and electron-deficient alkenes cannot be used due to competing conjugate addition (cf.57e).37 Furthermore, NH-sulfonamides required for aza-Wacker cyclization are not prepared directly from the alcohol because the requisite primary sulfonamides do not engage efficiently in conventional Mitsunobu reactions (cf.55 to 51). Additional advantages of the aza-Heck approach include predictable syn-migratory insertion of the alkene37c and the ability to use tunable phosphine ligands (because oxidative conditions are avoided).
It has been shown that cascade aza-Heck reactions are possible by using specifically designed substrates, bearing multiple alkenes. In 2001, Narasaka reported a series of processes leading to spirocyclic imines (Scheme 19A).41 In one example, aza-Heck–Heck cyclization of oxime ester 62 generated spirocyclic system 64 in 82% yield. Initial imino-palladation of the 1,1-disubstituted alkene affords intermediate 63, where β-hydride elimination is not possible. As such, a second migratory insertion can occur, this time involving the mono-substituted alkene, to deliver ultimately spirocycle 64. Similar cascade reactions have been reported using more recently developed N–O donors (Scheme 19B and C).20,21
The processes in Scheme 19 involve intramolecular capture of the alkyl-Pd(II) intermediate. Related intermolecular processes offer further flexibility. For example, our group has demonstrated carbonylative cascades involving a range of C-based or alcohol nucleophiles.26 Under a CO atmosphere, exposure of oxime ester 65 and Ph4B·NHEt3 to a P(3,5-(CF3)2C6H3)3 ligated Pd(0)-catalyst effected cyclization to target 66 in 62% yield. The proposed mechanism involves cyclization and carbonylation to afford cationic acyl-Pd(II) intermediate 67, which is intercepted by the pre-activated tetraarylborate (to give 68), leading to product 66. The choice of a tetraarylborate with a triethylammonium counterion was critical, with this latter component providing the proton required to trigger protodecarboxylation of the otherwise inhibitory pentafluorobenzoate leaving group (cf.Scheme 7). Note that in the oxime ester-based processes described earlier, the necessary proton is generated via the β-hydride elimination step. The carboamination protocol could be extended to other systems (e.g.69a–e), and alcohols and phenols were also found to be competent nucleophiles, leading to ester products (e.g.69f).26,42
Related carbonylative cascades involving alkynyl or vinyl boronates provide ynone and enones targets 70 and 71, respectively (Scheme 21A). Here, the addition of a protic additive was not required, which suggests that the pentafluorobenzoate leaving group is sequestered as FBzO-BPin, via Suzuki-like transmetallation from neutral acyl-Pd(II) intermediate 72. Similarly, under non-carbonylative conditions, aryl, vinyl or alkynyl boronates participated to provide 1,2-carboamination products 74a–f from cyclization of oxime esters 73 (Scheme 21B).
The processes in Schemes 20 and 21 demonstrate that N–O oxidative addition can serve as the basis for a diverse suite of alkene 1,2-carboamination reactions. Specifically, 1,2-amino-acylation, -carboxylation, -vinylation, -arylation and -alkynylation reactions are all achieved within a unified mechanistic framework. Other redox-neutral Pd-catalyzed methods for alkene 1,2-aminoarylation exploit oxidative addition into the incoming C-based fragment,40b,c,e,f and cannot access carbonylative products such as 66. Conversely, carbonylative aza-Wacker cyclizations, which are oxidative processes, provide 1,2-aminocarboxylation products (cf.69f), but do not tolerate organometallic nucleophiles because these effect reduction of the active Pd(II)-catalyst.40d Accordingly, this manifold does not provide access to, for example, 1,2-aminoarylation products. Given the new aza-Heck N–O donors that have recently been developed (vide supra), it is likely that further variants of the “umpoled” alkene 1,2-carboamination strategy summarized here will emerge in the near future.
Using ligand (Sa,S)-75, we found that enantioselective aza-Heck cyclization is efficient with a range of sterically diverse 1,1-disubstituted alkenes, generating targets 24a–f in 68–86% yield and 91:9–95:5 e.r. (Scheme 22A). Notably, systems with large or small groups at R2 cyclized with similar levels of efficiency (e.g.25f, R2 = Me, 94:6 e.r. vs24f, R2 = iPr, 93:7 e.r.). A stereochemical model that accounts for this observation is outlined in Scheme 22B. The imino group resides trans to the oxazoline and the alkene coordinates cis to this unit. In this arrangement, the alkene favors an orientation where the –CH2R3 substituent is positioned away from the phenyl substituent of the oxazoline. In this model, there are minimal steric interactions between the R2 substituent and the chiral ligand, which accounts for the similar enantioselectivities observed for 24d, 24e and 24f.
The enantioenriched dihydropyrrole products are suitable for derivatization via either the imine or alkene moieties (Scheme 22C). Exhaustive hydrogenation of 24d provided chiral α-tertiary amine 76 in 97% yield, whereas DIBAL-H reduction of imine 24f generated pyrrolidine 77 with good levels of diastereocontrol. The cyclizations in Scheme 22A are the first examples of highly enantioselective aza-Heck reactions, adding to a rare yet powerful class of processes that involve enantioselective migratory insertion of alkenes into Pd–N bonds.4,8,45 The development of further enantioselective aza-Heck cyclizations, including processes that use other N–O donors, is the focus of ongoing efforts.
This journal is © The Royal Society of Chemistry 2017 |