Xiaolin
Peng
a,
Jun
Xu
bc,
Tingting
Li
a,
Yonggui Robin
Chi
ac and
Zhichao
Jin
*a
aLaboratory Breeding Base of Green Pesticide and Agricultural Bioengineering, Key Laboratory of Green Pesticide and Agricultural Bioengineering Ministry of Education, Guizhou University, Huaxi District, Guiyang 550025, China
bSchool of Pharmacy, Guiyang College of Traditional Chinese Medicine, Huaxi District, Guiyang 550025, China
cDivision of Chemistry & Biological Chemistry, School of Physical & Mathematical Sciences, Nanyang Technological University, Singapore 637371, Singapore. E-mail: zcjin@gzu.edu.cn
First published on 18th September 2020
A dual catalytic chemo-selective cross-coupling reaction of two enals is developed. One enal (without α-substitution) is activated by an NHC catalyst to form an acylazolium enolate intermediate that undergoes Michael-type addition to another enal molecule bearing an alkynyl substituent. Mechanistic studies indicate that non-covalent interactions between the alkynyl enal and the NHC·HX catalyst play important roles in substrate activation and enantioselectivity control. Many of the possible side reactions are not observed. Our reaction provides highly chemo- and diastereo-selective access to chiral lactones containing functionalizable 1,3-enyn units with excellent enantioselectivities (95 to >99% ee).
Fig. 1 NHC-catalyzed reactions (a) with enals as Michael acceptors, (b) via cross intermolecular reactions of two enals, and (c) bio-active molecules bearing alkyne units. |
Here we disclose the first cross intermolecular reaction of two enals catalyzed by NHC catalysts (Fig. 1b). We envisioned that installation of an alkynyl substituent at the α-position of an enal can likely promote its reactivity as a Michael acceptor.10 The presence of an α-substituent can interrupt π-conjugations and thus minimize its reactivity via the corresponding enal-derived enolate/homoenolate intermediate formed with NHC, as shown by Bode, Glorius and others.6b,11 In addition, the alkynyl substituent can promote hydrogen-bonding interactions to increase the electrophilicity of the enal to react as a Michael acceptor, as observed in Jørgensen's amine-catalyzed reactions.12 In our present study, a non-linear effect was observed regarding enantiomeric excesses of the NHC catalyst and the catalytic reaction product. The reaction enantioselectivity was also found to be sensitive to solvents and bases. These results suggested that the NHC and its azolium salt pre-catalyst (NHC·HX) played dual roles in our reaction: one is to activate the α-unsubstituted enal via the formation of the NHC-bound enolate intermediate,6 the other is to activate the α-alkynyl substituted enal via the acidic proton of the chiral NHC·HX (Fig. 1b, intermediate I & transition state TS-I).13 With respect to applications, carbon–carbon triple bonds are found in a good number of bioactive molecules such as cleviolide, (+)-prelaureatin, and oxamflatin (Fig. 1c).14 We demonstrated that our products containing these alkynyl units could be readily transformed into a diverse set of molecules.
Cinnamaldehyde 1a and α-alkynyl enal 2a were chosen as the model substrates to search for suitable cross coupling reaction conditions (Table 1). The reactions were first carried out with Et3N as the base and THF as the solvent. When aminoindanol derived azoium salt A15 was used as the NHC pre-catalyst, the desired formal [4 + 2] product (3a) was obtained in a very encouraging yield (52%) with excellent ee and dr values (entry 1). The reactions appeared to be very sensitive to the structure of the NHC pre-catalysts, as similar azolium salts with N-phenyl or N–C6F5 substituents (B16 and C17) were completely ineffective, leading to no product formation (entries 2 & 3). Additional studies on the NHC pre-catalysts finally revealed that introduction of a Br substituent in the indane phenyl ring of the catalyst (D)18 led to 3a in 85% yield with 99% ee as nearly a single diastereomer (entry 4). Replacing Et3N with DIEA led to similar results (entry 5). Very interestingly, when the bases were replaced with DABCO or K3PO4, a significant drop in the enantioselectivity was observed (entries 6 & 7; see the ESI† for more details). Changing the solvent from THF to CHCl3 or EtOAc has moderate effects on reaction yields (entries 8 & 9).
Entry | NHC | Base | Solvent | Yieldb (%) | Eec (%) | Drd |
---|---|---|---|---|---|---|
a Unless otherwise specified, the reactions were carried using 1a (0.15 mmol), 2a (0.1 mmol), NHC (0.02 mmol), base (0.05 mmol) and solvent (1.0 mL) at rt for 24 h. b Isolated yield of 3a. c The ee values were determined via HPLC on a chiral stationary phase. d Dr values were determined via1H NMR of the crude reaction mixture. | ||||||
1 | A | Et3N | THF | 52 | 99 | >20:1 |
2 | B | Et3N | THF | 0 | — | — |
3 | C | Et3N | THF | 0 | — | — |
4 | D | Et3N | THF | 85 | 99 | >20:1 |
5 | D | DIEA | THF | 83 | 98 | >20:1 |
6 | D | DABCO | THF | 72 | 67 | >20:1 |
7 | D | K3PO4 | THF | 80 | 79 | >20:1 |
8 | D | Et3N | CHCl3 | 64 | 97 | >20:1 |
9 | D | Et3N | EtOAc | 68 | 99 | >20:1 |
Our reactions are highly chemo-selective. Under all these conditions (Table 1), several possible side products were not formed. For example, possible adducts with enal 2a as the enolate precursor (to form 3a′ or 3a′′′) were not observed. This is not a complete surprise as α-substituted enals are unreactive azolium enolate intermediate precursors under NHC catalysis.11 Our results showed that mixing of enal 2a with highly reactive electrophiles (such as alkylidene diketone; see the ESI† for more details) did not lead to any formal [2 + 4] addition product. Interestingly, the simple enal 1a did not behave as a Michael acceptor under our conditions, as homo-coupling adduct 3a′′ was not observed. In Scheidt's elegant study, the introduction of a Lewis acid additive is necessary to activate one molecule of the enal to react as a Michael acceptor.8a
Our further control experiments showed that when the α-alkynl substituent of 2a was replaced with an alkyl (e.g., Fig. 2, 2a1), vinyl (2a2), phenyl (2a3) or cyano (2a4) unit, the corresponding cross [2 + 4] reactions were not observed, with most of the starting materials remaining unchanged (for more details, see the ESI†). It is clear that the alkynl unit present in enal 2a played more important roles than simply blocking the enal α-carbon to interrupt the π-conjugations. Although attempts to identify key intermediates (and possible non-covalent interactions) between the NHC catalysts and the two enals did not lead to conclusive mechanistic pictures, our experiments did show strong non-linear effects with respect to the optical purities of the NHC pre-catalyst and the reaction product (Fig. 3, see the ESI† for more details).
Fig. 2 Unsuccessful α-substituted enal substrates for the NHC catalytic chemo-selective cross [2 + 4] reactions. |
Fig. 3 Nonlinear effects with respect to the product ee and the catalyst ee values using different bases: (a) Et3N and (b) DABCO. |
Specifically, the reaction of 1a and 2a was studied by varying the enantiomeric purities of the NHC pre-catalyst D under the optimized reaction conditions as indicated in Table 1, entry 4 (Fig. 3). The ee values of the products and the ee values of the catalysts showed an obvious negative nonlinear effect (Fig. 3a). This nonlinear effect suggests that at least two catalysts are involved in the enantio-differentiating step of our reaction.19 It appears both of the enals (1a and 2a) are activated by NHC and/or its salt (NHC·HX) in our formal [2 + 4] reaction. It is well established that cinnamaldehyde (1a) can be activated by NHC to form an acylazolium enolate intermediate.6 We therefore propose that the other enal (2a) bearing an alkynyl unit is activated by the acidic proton from NHC·HX via non-covalent interactions. These non-covalent interactions between 2a and NHC·HX could be further supported by the “linear-effect” shown by the ee values of the products and the catalysts when using DABCO as the base (Fig. 3b). In this case, only one catalyst was involved in the enantio-differentiating step of our reaction, since the non-covalent H-bonding interactions between 2a and NHC·HX could be broken by a stronger base (e.g., DABCO, K3PO4, see the ESI† for details) existing in the catalytic system. Similar activation of the α-alkynyl enal by a proton was proposed in Jørgensen's amine-catalyzed reaction.11 In the field of NHC related catalysis, the use of NHC·HX as a H-bond donating catalyst has been demonstrated by Huang, Scheidt, Guin, and others.13
The non-covalent interactions between the NHC pre-catalyst D and the alkynyl enal 2a can also be supported by 1H NMR analysis (Fig. 4). In the presence of the weak base Et3N, the acidic proton of the NHC pre-catalyst D shows an obvious change in the chemical shift after mixing with the alkynyl enal 2a (Fig. 4, a vs. b). Meanwhile, the chemical shift of the aldehyde proton of the substrate 2a is not changed in the same reaction system (a vs. c). These results support the existence of a non-covalent interaction between the NHC pre-catalyst D and the alkynyl enal 2a in our NHC organocatalytic reaction system (for more details, see the ESI†).
We then examined the substrate scope using different enals (1) to react with 2a under the optimized reaction conditions indicated in Table 1, entry 4 (Scheme 1). Substituents could be installed at each position of the phenyl ring of the cinnamaldehyde 1a, with all the products afforded in moderate to excellent yields with excellent chemo-, enantio- and diastereoselectivities (3b to 3p). The β-phenyl rings of the enal substrates (1) could also be switched to a naphthyl group or heteroaromatic groups. The corresponding products were afforded in excellent enantioselectivities, although the yields or dr values dropped in these cases (3q to 3s). To our delight, aliphatic enals could also be used as the enolate precursors for this NHC catalyzed chemoselective reaction, with the desired products afforded in moderate yields with excellent dr and ee values (3t & 3u).
Scheme 1 Scope of enals 1. aReaction conditions as stated in Table 1, entry 4. Yields are isolated yields after purification by column chromatography. Er values were determined via HPLC on a chiral stationary phase. bThe reaction was carried out on a 1.0 mmol scale based on 2a. |
The scope of the α-alkynyl enal substrates (2) was also examined (Scheme 2). Electron-donating substituents could be well tolerated on the β-phenyl rings of the α-alkynyl enals, with the desired products afforded in good yields with excellent ee values as single diastereomers (4a & 4b). The yields of the [2 + 4] products decreased when installing electron-withdrawing groups at any position of the β-phenyl rings, although the enantioselectivities were not affected (4c to 4f). The β-phenyl rings of the α-alkynyl enal substrates (2) could also be replaced with various heteroaromatic groups without obvious reduction in the product yields or stereoselectivities (4g & 4h). Substituents were also well tolerated on the phenyl rings attached to the alkynyl units of the enal substrates 2, with all the corresponding products afforded in moderate to good yields with excellent optical purities as single diastereomers (4i to 4p). Enal substrates 2 bearing heteroaromatic, aliphatic or terminal α-alkynyl groups also worked well in this reaction and gave the target products in moderate to good yields with excellent enantio- and diastereoselectivities (4q to 4w).
Scheme 2 Scope of α-alkynyl enals 2. aReaction conditions as stated in Table 1, entry 4. Yields are isolated yields after purification by column chromatography. Er values were determined via HPLC on a chiral stationary phase. bThe reaction was carried out on a 6.4 mmol scale based on 2v (1.0 g). |
As a technical note, this chemo-selective reaction of α,β-unsaturated enals could be carried out on a large scale without reduction of the product ee or dr values, although the yields of the final products slightly dropped (e.g., Scheme 1, 3a & Scheme 2, 4v).
Having examined the reaction scope with both of the enal reactants, we next seek to get additional insights into the reaction mechanism. Hammett studies20 were carried out using alkynyl enal substrates 2 bearing various p-substituents on the phenyl groups of the alkynyl units (Fig. 5). Alkynyl enal substrates 2 bearing 4-F (2i), 4-Cl (2j), 4-CF3 (2k), 4-CH3 (2l), and 4-OCH3 (2m) groups were chosen as the target substrates to evaluate their relative reaction rates compared with the alkynyl enal 2a. Kinetic studies showed that the substrates 2 bearing electron-withdrawing groups reacted faster than those bearing electron-donating groups (Fig. 5a). The Hammett plot of the relative reaction rates of the substrates 2i to 2m gave a positive slope (ρ = 1.0128). Therefore, a negatively charged transition state should be built up in the rate determining step of this [2 + 4] cycloaddition process. This is in accordance with the non-covalent H-bonding interactions that we have proposed to exist between the acidic proton of the NHC-precatalyst D and the alkynyl unit of the enal substrate 2 (Fig. 1b, TS-I, see the ESI† for more details).
Fig. 5 (a) Kinetic data and (b) Hammet plot for the competitive [2 + 4] cycloaddition reactions based on the σ values. |
Additionally, substrates 2x and 2y bearing steric bulky substituted phenyl groups on the alkynyl units were further examined for this NHC dual catalytic [2 + 4] cycloaddition reaction (Fig. 6). It is not surprising that the corresponding reaction products 4x and 4y were only afforded in poor yields with moderate ee values. Because the alkynly groups of the substrates 2x and 2y were shielded by the bulky mesityl and 2,6-diisopropylphenyl groups, the H-bonding interactions between the NHC pre-catalyst D and the alkynyl groups cannot be efficiently formed in these cases.
The chiral alkynyl pyranone products obtained from this methodology are rich in functionalities for further synthetic transformations (Fig. 7). For instance, the alkynyl group in 3a could react with the adjacent phenyl group under the catalysis of Cu(OTf)2 to give tricyclic product 5 in a good yield without reduction of the optical purity.21 The terminal alkylnyl group in 4v could participate in various addition reactions and afford a variety of multi-functionalized alkene products in moderate to excellent yields with excellent ee values as single diastereomers (e.g., 6, 7, 8, 10).22 A click reaction between the alkynyl group in 4v and benzyl azide led to the formation of the chiral triazole product 9 in almost quantitative yield with excellent optical purity as a single diastereomer.22d The ethynyl group in 4v could be selectively reduced to an ethyl group with a Pd/C and CaCO3 catalyst in a hydrogen atmosphere (11). Pyranone 4w bearing a 2-trimethylsilylethynyl group could be coupled with 2-iodoaniline to give the indole product 12 in a moderate yield and diastereoselectivity with an excellent ee value.23
Footnote |
† Electronic supplementary information (ESI) available. CCDC 1980067. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/d0sc03297b |
This journal is © The Royal Society of Chemistry 2020 |