Robert
Strutt‡
ab,
James W.
Hindley‡
abc,
Jordan
Gregg
a,
Paula J.
Booth
cd,
John D.
Harling
e,
Robert V.
Law
abc,
Mark S.
Friddin
*af and
Oscar
Ces
*abc
aDepartment of Chemistry, Imperial College London, Molecular Sciences Research Hub, Shepherd's Bush, London, W12 0BZ, UK. E-mail: o.ces@imperial.ac.uk
bInstitute of Chemical Biology, Imperial College London, Molecular Sciences Research Hub, Shepherd's Bush, London, W12 0BZ, UK
cFabriCELL, Imperial College London, Molecular Sciences Research Hub, Shepherd's Bush, London, W12 0BZ, UK
dDepartment of Chemistry, King's College London, SE1 1DB London, UK
eMedicinal Chemistry, GSK, Gunnels Wood Road, Stevenage, SG1 2NY, UK
fDyson School of Design Engineering, Imperial College London, Imperial College Road, SW7 2AZ, UK. E-mail: m.friddin@imperial.ac.uk
First published on 4th January 2021
Droplet microcompartments linked by lipid bilayers show great promise in the construction of synthetic minimal tissues. Central to controlling the flow of information in these systems are membrane proteins, which can gate in response to specific stimuli in order to control the molecular flux between membrane separated compartments. This has been demonstrated with droplet interface bilayers (DIBs) using several different membrane proteins combined with electrical, mechanical, and/or chemical activators. Here we report the activation of the bacterial mechanosensitive channel of large conductance (MscL) in a dioleoylphosphatidylcholine:dioleoylphosphatidylglycerol DIB by controlling membrane asymmetry. We show using electrical measurements that the incorporation of lysophosphatidylcholine (LPC) into one of the bilayer leaflets triggers MscL gating in a concentration-dependent manner, with partial and full activation observed at 10 and 15 mol% LPC respectively. Our findings could inspire the design of new minimal tissues where flux pathways are dynamically defined by lipid composition.
Unlike other approaches, the DIB platform also offers the option to assemble bilayer networks by connecting additional lipid-monolayer coated droplets in series, enabling the construction of minimal artificial tissues.18–20 By supplying different lipids to each droplet compartment,21 DIBs also offer a route for controlling membrane asymmetry, a feature that is ubiquitous in native biological membranes22 and is essential in facilitating core biological functions such as apoptosis and phagocytosis.23
This range of features combined with the ability to take quantitative measurements using either fluorescence microscopy or by electrophysiology (supported by hydrogel-coated silver/silver chloride electrodes inserted into each droplet) have led to the use of DIBs in a number of different studies concerning the properties of lipid membranes,24–26 the permeability of drug candidates/agrochemical compounds27,28 and the incorporation of membrane proteins.29,30 By using the DIB as an environment for the reconstitution of membrane proteins, the interplay between the protein and lipid bilayer can be interrogated ex vivo independently of the complex interaction networks found in cell biology. To-date multiple classes of membrane proteins have been reconstituted, including bacterial outer membrane proteins,21 ion channels31 and pore-forming peptide oligomers.32,33 In these systems, the inserted protein is typically activated by stimuli such as transmembrane potential,34,35 tension36,37 and/or pH,38,39 offering the user full control over the molecular flux across the membrane – a quality that can also be finely tuned through the use of mutants. Membrane asymmetry has also been shown to affect protein function, with an early study by Hwang et al. demonstrating the effect of charge asymmetry on the spontaneous gating probability of OmpG.32
The bacterial mechanosensitive channel of large conductance (MscL) is a membrane protein of interest due to its relatively large (∼3 nm, ∼3.5 nS) unselective pore size in the open-state. G22C F93W mutants enable the chemical activation40 and spectroscopic detection of MscL, whereas the V23T41 and G22S42 gain-of-function (GOF) mutants offer lower tension thresholds for activation (∼6 mN m−1). Although both GOF mutants have been reconstituted and activated in DIBs41–45 with greater ease than their wild-type counterpart, they still require individual droplets to be prepared or manipulated by the user, meaning that flux pathways cannot be defined in real-time. This becomes a problem when constructing droplet networks, especially given that network architecture and composition can be used to define the flow of molecular information throughout the tissue.46 To this end, recent work has focused on using external stimuli such as light19 or temperature47 to dynamically control network activation, however this has only been achieved for the water-soluble alpha-toxin alpha haemolysin and not for water-insoluble membrane proteins, highlighting the need to develop methods that offer new, orthogonal ways to define information flow across a bilayer network.
Here we show for the first time in a droplet system that the activation of MscL can be achieved using bilayer asymmetry, i.e. in the absence of any channel activators or applied external pressure. We achieve this by incorporating 1-oleoyl-2-hydroxy-sn-glycero-3-phosphocholine (LysoPC/LPC) into one of the bilayer leaflets (Fig. 1B and C) to generate an asymmetric change in the lateral pressure profile that has been shown previously to activate the MscL channel,48–53 and identify protein activity using single-channel electrical measurements (Fig. S1†). Our method to control the full gating of the G22C F93W loss-of-function (LOF) channel in a DIB system using membrane patterning could be applied to other mutants and serve as a new strategy to control molecular flux in droplet networks, helping to design and build minimal tissues capable of increasingly complex information processing.
MscL channel activity was then assayed via three different activation methods in parallel: (i) chemical modification of vesicle structure through the addition of LPC (Fig. 2A) (ii) chemical modification of vesicle structure through the enzymatic activity of secretory phospholipase A2 (sPLA2)55 and (iii) chemical modification of the MscL channel through addition of the channel activator [2-(trimethylammonium)ethyl]methanethiosulfonate (MTSET). An LPC concentration gradient was added to vesicles ± MscL, and the calcein flux response was monitored over 5 hours (Fig. 2B). Vesicles containing the MscL channel displayed calcein flux that increased as a function of increasing LPC concentration, indicating that the lysolipid could successfully activate the channel. When the same LPC concentrations were added to vesicles lacking the MscL channel, negligible calcein flux occurred over the 300 minute experimental lifetime (Fig. 2C and S4†), indicating that the channel is essential for triggered release in response to LPC, and that the expressed MscL protein is active.
Based on these flux measurements, the threshold concentration of LPC necessary for channel activation lies between 1–5 mol% LPC. This value agrees well with previous investigations of the effect of LPC on MscL reconstituted into vesicles,49,51,53 where less than 10 mol% LPC was necessary for channel activation.53 To further confirm channel activity, enzymatic and chemical activation of the reconstituted channel was undertaken using sPLA2 and MTSET respectively (Fig. S5†). Again, the presence of the MscL channel enabled calcein flux responses to enzymatic and chemical (channel labelling) stimuli, whilst negligible release was observed for vesicles lacking the channel, indicating high activity of the channel.
To generate asymmetric DIBs, the first droplet was formed containing PC:PG:LPC vesicles with increasing LPC concentrations (5, 10 and 15 mol%), whilst a second droplet was formed containing PC:PG vesicles ± MscL (Fig. 3A, B and S9† for 15, 10 and 5 mol% LPC traces respectively). Asymmetric DIBs incorporating MscL showed LPC-dependent gating behaviour, with 10-fold greater gating events occurring in MscL DIBs containing 15 mol% vs. 10 mol% respectively. We observed negligible gating events in DIBs containing 5 mol% LPC (#events = 42/6/1 for 15/10/5% LPC respectively). These events could be clustered into seven gating states, where each state is defined as a function of the percentage of full channel conductance (S%). Six of these states align with previously proposed conductance states for the channel57,58 (Table S1 and Fig. S6†). A histogram analysis approach was used to characterise the step changes of all traces (see Note S1 for further information†).
Fig. 3 Membrane asymmetry gates MscL G22C F93W channels reconstituted into DIBs. (A) Asymmetric MscL DIBs containing 15 mol% LPC are formed by incubating LPC-containing vesicles in the left droplet of the DIB (PC:PG:LPC 80:5:15) and MscL-containing vesicles in the right droplet (PC:PG:LPC 95:5:0). Each 1 μl droplet additionally contained 20 mM HEPES, 100 mM KCl pH 7.4 buffer. The activation of sub conducting states was observed, clustered into three main gating events ∼14, 21 and 42 pA that are attributed to sub-conducting states of the MscL channel (n = 4). Further events for 15 mol% LPC discussed in Fig. 4. (B) Reducing the LPC concentration in the asymmetric DIB attenuates channel function. An ∼10-fold drop in gating events are observed when LPC is reduced to 10 mol%, and no fully open states are recorded for the MscL channel (n = 3). (C) If a symmetric MscL DIB is generated without LPC, no gating events are observed indicating that the MscL channel is closed (n = 2). (D) If asymmetric LPC DIBs are prepared without MscL, no gating events are observed, indicating that in (A) flux across the bilayer is controlled by the response of MscL to membrane asymmetry (n = 3). Cartoons illustrate lipid and protein compositions. Black traces show examples of full, 50 kHz recorded trace for each composition with featured zoom in to indicate channel activity. Zoom in data shown with an applied low pass filter at 2.5 kHz. All traces recorded at −100 mV. The percentage standard error of the mean is denoted by % SE. |
The majority of events in our 15% LPC results occurred at S4.5 ∼14 pA (0.14 nS, n = 23) and S6.6 ∼21 pA (0.21 nS, n = 4). We additionally observed events occurring at S13 ∼42 pA (0.42 nS, n = 3), which we assign to the sub-conducting state of MscL observed in our previous work.56 At times, we saw combinations of such states leading to the observation of events ∼55 pA (Fig. 3A(iv)), which could represent the gating of two separate MscL proteins or a change in the conformational state of a single channel. Statistical testing between these three states observed in 15% LPC DIBs confirms that the events can be clustered into three populations in this manner (p < 0.001), as well as confirming that the S4.5 sub-conductance state was observed in both 10 and 15% LPC DIBs respectively (p < 0.001). As only the lowest two sub-conductance states are observed at 10% LPC, we conclude that 10% LPC is able to only partially gate the channel.
As mentioned above, the observed gating events ∼42 pA correlate well with our previous work56 which is established as S12, a subconductance state ∼12% open conductance.58 Similarly, the low sub-conductance state of S6.6 has been previously observed in MscL gating studies.57 We note that subconductance states were maintained for extended lengths in our recorded 15% LPC traces (Fig. S7B and C†), indicating that the combination of MscL and asymmetric LPC may be useful for sustained flux across a DIB. Interestingly, the most frequent subconductance state observed here (S4.5) has not been observed in previous MscL electrophysiology experiments. Its appearance here is likely due to the combination of using a loss-of-function channel mutant under high potential (−100 mV), which has been shown to increase sampling of low conductance states.57
The asymmetric incorporation of 15% LPC in MscL DIBs also led to the occupation of higher gating states (Fig. 4). The states shown in Fig. 4A–C are attributed to the higher subconductance states of the channel, showing good agreement with previously established conductances for these states58 (Table S1 and Fig. S6†). The open state of the channel (S100 ∼3.2 nS, n = 3) was observed to occur through these larger subconductance states (Fig. 4D, S13 and S14†), indicative that asymmetry can drive full opening of the MscL channel. We note that LPC flip-flop has previously been shown to be negligible on similar timescales to those within our system.59,60 Here, LPC flip-flop appears insignificant as MscL gating occurs throughout the ∼30 min experimental timescale (Fig. 3A).
If DIBs were produced containing MscL but without LPC, negligible gating events occurred, confirming that the protein is in the closed state in the absence of LPC (Fig. 3C). This agrees with our previous work, where gating of reconstituted MscL in symmetric DIBs was not observed.56 Similarly, if DIBs were produced without MscL but LPC asymmetry was maintained (Fig. 3D), no gating events were detected, indicating that gating could not be attributed to transient pore formation in the DIB caused by the presence of non-bilayer forming LPC.61
To probe the role of LPC asymmetry further, control experiments with symmetric DIBs containing 15 mol% LPC were performed. This composition attenuated bilayer formation resulting in poor DIB success rates (n = 1/6). When formed, the recordings indicated bilayer instability such that protein activity could not be delineated from the trace (Fig. S12†). All unfiltered traces for our complete data set can be observed in Fig. S7–S12† in the ESI.†
The increased likelihood for occupying sub-conductance states was not observed in previous work where patch-clamp electrophysiology was used to analyse the effect of LPC on MscL.51 We attribute this to differences in experimental setup between excised bilayer patches in patch-clamp and the DIB membrane utilised in droplet electrophysiology, the high applied potential of −100 mV leading to increased occupancy of subconductance states57 and the LOF mutant used in the study (WT vs. G22C F93W here). Whilst further optimisation is necessary to generate more digital activation behaviour, our electrophysiology experiments indicate that LPC can be successfully employed to gate MscL reconstituted into asymmetric DIB membranes.
Secondly, the flux we have observed is actuated purely by asymmetry in the lipid bilayer and could be patterned during network assembly, or tuned dynamically using optical tweezers as demonstrated recently using vesicles.65,66 Furthermore, LPC flip-flop could be used to build pre-defined flux patterns into the network, as flip-flop to a symmetric bilayer should close the MscL channel.48 The slow kinetics of this process67 could be potentially altered if combined with LPC-chelators such as BSA that have been shown to deactivate MscL channels upon removal of LPC from the membrane.53
The activation mechanism of MscL in response to asymmetric membrane incorporation of LPC has been previously indicated to occur via asymmetric changes in the lateral pressure profile of the membrane, and not via-stretch-induced tension in the membrane.48,51 In our DIB setup, the global curvature of the membrane is insignificant from the perspective of a single channel, whilst all our experiments are conducted without applied pressure or mechanical stimulation. We therefore attribute the gating observed here to an asymmetric curvature stress induced by LPC in the DIB perturbing the lateral pressure profile at the water–lipid interface. Such a change in membrane lateral pressure reduces the gating energy for the channel, enabling spontaneous gating without applied pressure.68
MD simulations have indicated that the asymmetric presence of LPC can generate areas of high local curvature in the membrane that contribute to channel activation.69 This would be energetically less likely to occur in DIBs compared to vesicles, as DIBs possess ∼30–60-fold higher surface tension (∼1–2 mN m−1 (ref. 26) vs. ∼30 μN m−1 (ref. 70)). Such an effect may decrease the probability of channel activation in DIBs compared to vesicles assuming local curvatures are truly necessary. Comparative electrophysiology experiments on the same MscL channel in both asymmetric DIBs and patch-clamp setups may help further elucidate the mechanism of LPC-activation of MscL.
To gain further insight to our system the monolayer surface tension of aqueous droplets stabilised with PC:PG:LPC vesicles containing 0–15 mol% LPC was quantified using droplet shape analysis (Fig. S15†). A linear decrease in surface tension was observed from 0–15 mol%, with the surface tension difference between a droplet containing 0 and 15% LPC found to decrease by 0.74 mN m−1, from 1.83 ± 0.23 mN m−1 for 0 mol% LPC to 1.09 ± 0.71 mN m−1 for 15 mol% LPC. This tension decrease is expected considering that LPC acts as a surfactant, and measured tensions are similar to those of previously studied asymmetric DIBs (1–2 mN m−1 (ref. 26)). Indeed, a similar decrease in tension in response to LPC has been shown previously for phosphatidic acid-stabilised droplets.71 These results appear to match well with the predicted effect of asymmetric LPC generating a pressure differential across the leaflets of a DOPC membrane.69 This further indicates that the primary driver of channel activation observed here is leaflet asymmetry and not simply a high bilayer surface tension, as DIB surface tensions are an order of magnitude lower than the activation tension of the channel (>12–14 mN m−1 (ref. 51)).
We note that the threshold activation concentration of LPC required for MscL gating differs between the vesicle and DIB model systems: gating occurs from 5 mol% LPC added to MscL vesicles, whilst 10 mol% LPC is necessary when the channel is reconstituted into DIBs. We hypothesise that the increased activation threshold may be due to LPC partitioning between the DIB and droplet monolayers or into the bulk hexadecane.72 These mechanisms would reduce the effective LPC concentration in the bilayer to minimise the destabilising effect of the lyso-lipid73 and hence minimise the free energy of the system.
Although we see full gating of the MscL channel in our work, the most frequently observed events appeared to be gating via sub-conductance states. This could be due to LPC partitioning, higher applied voltage or may reflect the high activation energy of the mutant used here.51 The sidedness of MscL insertion may also play a role: MscL is reconstituted without preference into vesicles (and hence into the DIB), and the presence of both orientations in the same membrane may affect which channels are gated by LPC asymmetry as well as channel gating probability. Interestingly, the amphipath 2,2,2-trifluoroethanol was recently shown to activate MscL when added to either leaflet of a patch-clamp setup,74 indicating that LPC may also be able to activate both channel orientations in the DIB. Further investigation could be conducted by using protocols which reconstitute MscL in a single orientation into the DIB membrane as well as testing the LPC activation mechanism with wild-type or GOF channel mutants with lower gating energies.51 Indeed, MscL V23T has shown a higher probability for the open state when reconstituted in DIBs in response to mechanical actuation,44 and channel activation should be feasible by using LPC to create asymmetric bilayers.
Recently, MscL V23T was shown to possess voltage-dependent gating in asymmetric DPhPC:DOPhPC DIBs under mechanical stimulation when negatively hyperpolarized.45 This was achievable for the V23T mutant due to a dominant dielectric effect compared to the WT channel on account of increased pore solvation. The G22C F93W channel possesses increased pore hydrophobicity (and hence decreased pore solvation75) compared to the WT, reducing the dielectric component of the channel in the presence of an electric field compared to both V23T and WT. Charge asymmetry is therefore significantly unlikely to gate either the WT or G22C MscL channels without applied tension, but such asymmetries may affect the onset of MscL gating to an LPC asymmetry. This may be useful as a tool to further differentiate channel function in droplet networks.
Footnotes |
† Electronic supplementary information (ESI) available. See DOI: 10.1039/d0sc03889j |
‡ These authors contributed equally. |
This journal is © The Royal Society of Chemistry 2021 |