Issue 20, 2022

A dynamic in vitro oral mastication system to study the oral processing behavior of soft foods

Abstract

A bolus-oriented artificial oral mastication system was developed to simulate the dynamics of food mastication in the human mouth. The system consists of a chewing unit, a bolus forming unit, and provisions for the dynamic incorporation of saliva during mastication. The system performance was validated with in vivo trials (n = 25) considering time-dependent changes in particle size, textural attributes and rheological behavior of the bolus. Idli, a fermented and steamed black gram-rice-based Indian food was considered the model soft food for all trials measured in triplicates. The mastication dynamics were evaluated by analyzing bolus properties during every 3 s of mastication. Large strain shear rheology tests revealed that the viscosity of the sample decreased over time. Results of in vivo trials follow close trends in particle size and rheological behavior and have no significant change in correlation with in vitro mastication results. Similar observations were made in the half softening time of idli during mastication as determined using the relative change in hardness (hardness ratio (Ht/H0)) values fitted to the Weibull model. Also, a model to simulate the time-dependent changes in bolus adhesiveness was developed.

Graphical abstract: A dynamic in vitro oral mastication system to study the oral processing behavior of soft foods

Article information

Article type
Paper
Submitted
22 Mar 2022
Accepted
04 Sep 2022
First published
14 Sep 2022

Food Funct., 2022,13, 10426-10438

A dynamic in vitro oral mastication system to study the oral processing behavior of soft foods

V. Raja, S. R. Priyadarshini, J. A. Moses and C. Anandharamakrishnan, Food Funct., 2022, 13, 10426 DOI: 10.1039/D2FO00789D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements