Issue 17, 2023

Enzyme-inspired catalysts with high activity and selectivity for oxidative polymerization of 2-phenylphenol

Abstract

Enzyme-inspired copper catalysts having 1,4,7-triazacyclonones substituted at the nitrogen atoms with tBu group(s) have been developed for the regioselective oxidative polymerization of 2-phenylphenol. These in situ prepared catalysts remarkably accelerated the polymerization to produce regioregular poly(2-phenylphenylene oxide). The polymer obtained by using the catalyst with one or two tBu group(s) exhibited a higher number-averaged molecular weight and a narrower molecular distribution than the polymer synthesized by a previous enzyme-model catalyst lacking tBu groups, although a certain amount of free radical coupling occurred in the catalysis with three tBu groups. The enzyme-inspired catalysis would proceed through an end-on peroxide complex different from a side-on peroxide complex formed in the enzyme-model catalysis, achieving both the short reaction time and high molecular weight. Thus, a freestanding film was formed by solvent-casting the present polymer, which was reported to show an ultra-low dielectric constant and high thermal stability, and therefore, it could be promising as an insulating polymer in the upcoming sixth-generation technology.

Graphical abstract: Enzyme-inspired catalysts with high activity and selectivity for oxidative polymerization of 2-phenylphenol

Supplementary files

Article information

Article type
Paper
Submitted
06 Feb 2023
Accepted
09 Jul 2023
First published
11 Jul 2023

Catal. Sci. Technol., 2023,13, 4968-4977

Enzyme-inspired catalysts with high activity and selectivity for oxidative polymerization of 2-phenylphenol

A. Nakano, V. S. Raut, N. Asao, A. Ando, K. Fujisawa and H. Higashimura, Catal. Sci. Technol., 2023, 13, 4968 DOI: 10.1039/D3CY00170A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements