Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Insulative wood materials templated by wet foams
Elisa S.
Ferreira
ab,
Elizabeth
Dobrzanski
bc,
Praphulla
Tiwary
d,
Prashant
Agrawal
d,
Richard
Chen
d and
Emily D.
Cranston
*ac
aDepartment of Wood Science, University of British Columbia, Vancouver, BC V6T 1Z4, Canada. E-mail: emily.cranston@ubc.ca
bBioproducts Institute, University of British Columbia, Vancouver, BC V6T 1Z4, Canada
cDepartment of Chemical and Biological Engineering, University of British Columbia, Vancouver, BC V6T 1Z4, Canada
dPlantee Bioplastics Inc., Vancouver, Canada
First published on 2nd February 2023
Abstract
Correction for ‘Insulative wood materials templated by wet foams’ by Elisa S. Ferreira et al., Mater. Adv., 2023, 4, 641–650, https://doi.org/10.1039/d2ma00852a.
The authors regret that the y-axis label in Fig. 6b was shown incorrectly in the original article. The correct version of Fig. 6b is shown here.
 | ||
| Fig. 6 Mechanical properties of wood foams prepared with wood/PVA ratios of 2, 3, and 4: (a) stress–strain diagrams under compressive strain showing three compressive regions: (I) elastic, (II) plateau, and (III) densification; (b) compressive strength at 10% compression according to ASTM Standard (D1621-16). | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2023 |