Open Access Article
This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence

Retraction: Single walled carbon nanotubes reinforced mineralized hydroxyapatite composite coatings on titanium for improved biocompatible implant applications

D. Gopi*ab, E. Shinyjoya, A. Karthikaa, S. Nithiyaa, L. Kavithac, D. Rajeswaria and Tingting Tangd
aDepartment of Chemistry, Periyar University, Salem 636011, Tamilnadu, India. E-mail: dhanaraj_gopi@yahoo.com; Fax: +91 427 2345124; Tel: +91 427 2345766
bCentre for Nanoscience and Nanotechnology, Periyar University, Salem 636011, Tamilnadu, India
cDepartment of Physics, School of Basic and Applied Sciences, Central University of Tamilnadu, Thiruvarur 610 101, Tamilnadu, India
dShanghai Key Laboratory of Orthopaedic Implants, Department of Orthopedic Surgery, Shanghai Ninth People’s Hospital, Shanghai Jiaotong University School of Medicine, 639 Zhizaoju Road, Shanghai 20011, P. R. China

Received 22nd March 2023 , Accepted 22nd March 2023

First published on 28th March 2023


Abstract

Retraction of ‘Single walled carbon nanotubes reinforced mineralized hydroxyapatite composite coatings on titanium for improved biocompatible implant applications’ by D. Gopi et al., RSC Adv., 2015, 5, 36766–36778, https://doi.org/10.1039/C5RA04382D.


The Royal Society of Chemistry, with the agreement of the named authors, hereby wholly retracts this RSC Advances article due to concerns with the reliability of the data in the published article.

There are unexpected similarities in the XRD patterns presented in Fig. 2a–c in the 22–24° and 28–56° regions.

The left-hand side of the cross-sectional SEM image in Fig. 3d has been duplicated in other publications,1–3 whereas the right-hand section of the image in Fig. 3d has been duplicated in another article.4

The authors informed the Editor that the characterization of the original samples was outsourced, and they do not have the original raw data for the published results.

Given the significance of the concerns about the validity of the data, and the lack of raw data, the findings presented in this paper are not reliable.

S. Nithiya and Tingting Tang were contacted but did not respond.

Signed: D. Gopi, E. Shinyjoy, A. Karthika, L. Kavitha and D. Rajeswari

Date: 16th March 2023

Retraction endorsed by Laura Fisher, Executive Editor, RSC Advances

References

  1. M. Chozhanathmisra, S. Ramya, L. Kavitha and D. Gopi, Colloids Surf., A, 2016, 511, 357–365 CrossRef CAS.
  2. D. Gopi, E.-S. M. Sherif, D. Rajeswari, L. Kavitha, R. Pramod, J. Dwivedi and S. R. Polaki, J. Alloys Compd., 2014, 616, 498–504 CrossRef CAS.
  3. D. Gopi, K. Arumugam, S. Nithiya and L. Kavitha, Mater. Chem. Phys., 2014, 144, 75–85 CrossRef CAS.
  4. D. Gopi, A. Karthika, D. Rajeswari, L. Kavitha, R. Pramod and J. Dwivedi, RSC Adv., 2014, 4, 34751–34759 RSC.

This journal is © The Royal Society of Chemistry 2023
Click here to see how this site uses Cookies. View our privacy policy here.