Rui
Song
a,
Bili
Wang
a,
Kai
Feng
a,
Jia
Yao
a,
Mengjie
Lu
a,
Jing
Bai
a,
Shuai
Dong
b and
Ming
An
*b
aDepartment of General Education, Army Engineering University of People's Liberation Army, Nanjing 211101, China
bSchool of Physics, Southeast University, Nanjing 211189, China. E-mail: amorn@seu.edu.cn
First published on 23rd November 2023
With the rise of two-dimensional (2D) materials, unique properties that are completely distinct from bulk counterparts continue to emerge at low-dimensional scales, presenting numerous opportunities and challenges. It also provides a new perspective for the study of transition metal systems. Here, based on density functional theory (DFT), the physical properties of 2D monolayer LiV2S4 have been studied. Remarkable changes have been observed, i.e., vanadium dimerization, ferromagnetism, charge distribution and metal–insulator transition (MIT). It is argued that the electronic instability leads to the V dimerization, which further lifts the degeneracy of charge distribution and stabilizes the charge and spin ordering state.
However, in contrast to the high enthusiasm for 2D materials, the research on low-dimensional transition metal compounds is relatively limited, which mainly comes from the fact that most transition metal compounds exist in three-dimensional bulk form, rather than the graphene-like, i.e., layered van der Waals (vdW) stacking, structure. Fortunately, due primarily to technological advances, more and more 2D materials have been prepared, including non-vdW transition metal compounds.18–21 These nanosheets can be obtained by mechanical peeling,22 selective etching23 or ion intercalation19,24 with their thickness down to the monolayer limit, making the study of non-vdW transition metal compounds possible.25
Recently, the AgCr2S4 single layer has been successfully exfoliated from its non-vdW parent bulk,19 with its composition and crystal framework well preserved. This successful peeling greatly inspires further research on the low-dimensional properties of non-vdW materials, especially those belonging to the AMX2 family (where A is a monovalent metal, M is a transition metal and X is a chalcogen).20,26 AMX2 compounds have a layered structure composed of a stacking of spacer A layers and MX2 layers. The latter is composed of edge-sharing MX6 octahedra forming a geometrically frustrated triangular lattice. Both the specific stacking pattern and the A-site coordination can lead to distinct structural symmetries.27,28 In addition to the structural variety, the multiple electronic degrees of freedom often give rise to intriguing behaviors such as cluster formation,29,30 spin/orbital ordering2,27,31 and superconductivity.32
Here, based on first-principles calculations, the basic properties of bulk LiVS2 and the novel behavior exhibited by single layer LiV2S4 with dimensionality reduction have been investigated. Bulk LiVS2 crystallizes in a trigonal structure, and its layered feature is illustrated in Fig. 1a. Both Li and V ions are located in the octahedral holes of hexagonal close-packed S atoms, forming 2D triangular lattices (see Fig. 1b). Upon cooling, a paramagnetic metal to nonmagnetic insulator transition takes place at about 310 K,30,33 accompanied by in-plane vanadium trimerization. Moreover, being sandwiched between insulating LiVO2 and metallic LiVSe2, LiVS2 is believed to locate at the boundary between correlated insulator and metal.29 Based on the above facts, low-dimensional effects may provide an additional parameter for manipulating the underlying interactions and therefore may possibly lead to unique collective behaviors.
In this work, the structural, magnetic, and electronic properties of LiV2S4 monolayer have been studied. Drastic changes have been observed, i.e., the appearance of magnetism, charge ordering, vanadium dimerization along with MIT. At the single layer limit, a novel mixed-valent state emerges with nominally 1:1 ratio of V3+ (3d2) and V4+ (3d1). We suggest that the partially occupied d orbitals and the coupling with electronic degrees of freedom are responsible for lifting the degeneracy of charge distribution and stabilizing the charge ordering state.
As shown in Fig. 1c and d, the accompanying MIT has also been verified by our calculations. The top view of the corresponding structures is illustrated in the insets. It can be seen that the in-plane vanadium trimerization not only lowers LiVS2's structural symmetry, from Pm1 (space group no. 164) to P31m (no. 157), but also opens an energy gap (1.15 eV). This MIT accompanied by in-plane trimerization is consistent with previous observations reported in ref. 29 and 33. The electronic densities of states (DOS) near the Fermi level mainly originate from V's 3d orbitals, exhibiting Mott–Hubbard insulating behavior.
The influence of the effective Hubbard U (Ueff) has also been considered (see Fig. S1 in the ESI†). The in-plane (out of plane) lattice constant increases (decreases) monotonically with the increase of Ueff. The optimized lattice constants are in good agreement with the previously reported values when Ueff is taken as 3.5 eV.27,30 Additionally, the influence of Ueff on the electronic properties of both LiVS2 bulk and LiV2S4 monolayer has been investigated with the commonly adopted value ranging from 2 to 4 eV. The obtained results have no substantial impact on our final conclusion. Therefore, this specific Ueff value (3.5 eV) will be adopted in the following calculations by default.
Inspired by the successful exfoliation of AgCr2S4 monolayer via ion intercalation,19 LiVS2 with a similar layered structure may likewise be exfoliated into nanosheets and even monolayers. As mentioned above, dimensional reduction is expected to lead to unique properties and help reveal the underlying mechanisms behind these phenomena. Therefore, the structure, magnetic and electronic properties, and the stability of LiV2S4 monolayer have been explored in detail in the following.
Starting from the highly symmetric Pm1 bulk phase, a LiV2S4 monolayer has been constructed. As shown in Fig. 2a, the monolayer structure consists of two outermost VS2 layers and one Li-ion layer sandwiched in between. To study the dynamic stability of the LiV2S4 monolayer, the phonon spectrum has been calculated using the above D3d symmetric structure with perfect in-plane triangular lattice. As shown in Fig. 2b, the existence of imaginary vibration modes indicates the dynamical instability of this highly symmetric system. Further modal analysis suggests these high-imaginary-frequency vibrations are mainly contributed by in-plane displacement of V ions, resulting in a moderate deformation of the triangular lattice (see Fig. S2 in the ESI† for more details).
Fig. 2 (a) The side view of the highly symmetric (Pm1) LiV2S4 monolayer. (b) The calculated phonon dispersion curve of LiV2S4 monolayer with ideal triangular lattice. |
To find the ground state of the LiV2S4 monolayer, both the in-plane lattice constants and the atomic positions have been fully optimized. Supercells are adopted to accommodate the deformation in modelling with the periodic boundary condition. In the optimized monolayer structure, there are three inequivalent V–V bonds, i.e., 3.27 Å, 3.44 Å, and 3.57 Å, as denoted by s, m, and l in Fig. 3a, respectively. The two in-plane V ions with the shortest V–V distance approach each other, presenting typical dimerization behavior, in contrast to the trimerization observed in its bulk counterpart. As expected, these in-plane dimers alternate along the (a + b)-direction and b-axis (here, a and b are the in-plane lattice vectors of the original primitive cell), forming a staggered pattern. Moreover, this in-plane distortion is not as severe as in the bulk form. The difference in V–V bond lengths is between 0.13–0.30 Å, which is much smaller than that (around 0.60 Å) of the bulk material.29,30 The variation in system energy as a function of the degree of dimerization, which has been normalized relative to the ground state distortion, is shown in Fig. 3b. This in-plane distortion can effectively reduce the system energy from the undistorted state to the optimized ground state by about 40 meV V−1. Besides, the structural symmetry is also reduced from D3d to C2h (P2/c space group), while leaving the layered feature untouched.
The structure stability of the optimized system has been verified by phonon spectral analysis and molecular dynamics (MD) simulations using the orthorhombic supercell. The calculated phonon spectrum is shown in Fig. 3c, which shows no significant imaginary frequency, indicating the dynamic stability of the structure. Besides, the structure after MD simulations at room temperature (RT = 300 K) shows no severe distortion and the basic crystal framework remains intact despite the existence of thermal fluctuations (see Fig. 3d), further confirming the thermodynamic stability of our optimized structure. It is worth mentioning that the MD simulations also indicate that the in-plane dimerization is not suppressed but rather enhanced. The V–V distance within the dimer is reduced from 3.27 Å at 0 K to less than 3.00 Å at RT. The statistical results of the MD simulations are presented in Fig. S3 of the ESI.† The mechanism behind this thermal enhancement effect and its potential application is worthy of further exploration.
To investigate the magnetic ground state, four most possible magnetic orders, i.e., ferromagnetic (FM) and two antiferromagnetic (AFM) ones (stripe AFM and zigzag AFM) for the orthorhombic supercell, and an in-plane 120° spin structure (Y-AFM) order for the hexagonal supercell,40 have been taken into account. The corresponding supercells and magnetic orders are shown in Fig. 4a and Fig. 4b–e, respectively.
Our calculation results indicate that the FM order is energetically more favorable than the other magnetic orders. The detailed results are summarized in Table S1 of the ESI.† The magnetic ions in the VS2 layer exhibit a significant FM tendency upon peeling from the parent bulk to the LiV2S4 monolayer. This dimensional reduction induced magnetism can be interpreted on the basis of the d orbital occupation of V. From the change of chemical formula before and after exfoliation, the V ion in LiV2S4 monolayer is in the mixed valence state (V7+2), rather than the original trivalent state in its bulk form. Both the electron hopping among neighboring V with partially filled d orbitals and the p orbital intermediated V–S–V super exchange favor FM coupling and thus give rise to the in-plane FM order.
Moreover, since there are two VS2 layers in LiV2S4 (see Fig. 2a), in order to study the interlayer magnetic interaction, the FM layers with AFM interlayer coupling (A-AFM order) have also been taken into consideration. As listed in Table S1 (ESI†), the FM intra- and inter-layer coupling is energetically robust against all the above considered AFM orders and thus is the magnetic ground state of monolayer LiV2S4. The negligible energy difference (0.31 meV V−1) between FM and A-AFM order indicates the weak interlayer magnetic coupling, which is consistent with our intuitive expectations since the interlayer V–V spacing is quite large (more than 6.3 Å).
More interestingly, after dimerization, the local magnetic moments show a remarkable divergence within each V dimer, i.e., 1.33 μB and 1.88 μB corresponding to V4+(3d1) and V3+(3d2), respectively, indicating the existence of charge disproportionation. What's more, this charge distribution within the V dimer synergistically constitutes the in-plane charge ordering. As shown in Fig. 5a, this charge ordering is closely related to vanadium dimerization, presenting a similar distribution pattern which will be discussed in the following paragraph. Moreover, this charge ordering not only lowers the system energy but also opens an energy gap (about 0.65 eV) at the Fermi level (see Fig. 5b and c), resulting in the MIT. Unlike the paramagnetic metal to nonmagnetic insulator transition in bulk LiVS2, this gap opening in the LiV2S4 monolayer is strongly spin coupled, while the non-spin polarized DOS exhibits typical metallic behavior (see Fig. S4 in ESI†). In other words, it is not the in-plane dimerization but rather spin ordering that plays a decisive role in opening the gap.
By comparing the orbital-projected DOS (PDOS) of V ions, the orbital ordering is found to exist in LiV2S4 accompanying the observed charge ordering. As shown in Fig. 5c and depicted in Fig. 5d, the dominant portions of neighboring Vs’ 3d orbitals exhibit staggered dxy and dyz ordering. This feature is also demonstrated in Fig. 5a. More precisely, based on our calculation results, the electronic states of the two V ions in one dimer (labelled as V1 and V4 or V2 and V3) are approximately in d1 and d2 configurations, respectively. This finding corresponds to the PDOS, in which the d1 electron occupies the dyz (dxy) orbital of V1 (V2). While for V3 (V4), the dyz (dxy) orbital is occupied by one d electron, and the other two t2g orbitals are almost equally populated with the other d electron. Therefore, when viewed along the c-axis, the local charges on V1 and V2 exhibit a spindle like distribution, while V3 and V4 are more square like. Here, since the c-axis does not coincide with the z-axis of the VO6 octahedron, as illustrated in Fig. 5d, the ELF cross-section does not strictly match the orbital character defined in the xyz coordinate. However, the orderly distribution pattern of local charges is still quite evident. For more intuitive display, the dimers and the V3+, V4+ ions with staggered distribution are marked by light red dashed ellipses and black dotted lines in Fig. 5a, respectively.
According to Goodenough–Kanamori–Anderson (GKA) rules, superexchange between two orthogonal d orbitals through intermediate p orbitals (e.g., V1–S–V4, V2–S–V3) leads to an FM interaction. However, the overlap of neighboring d orbitals (e.g., dxy orbitals of V2 and V4) tends to AFM exchange, while the unequal occupation of the other d orbitals (e.g., the dyz/dxz orbitals of V2 and V4) favors FM exchange. All the above factors, together with the effect of unequal V–V distance, result in FM zigzag chains composed of V dimers (e.g., V1–V4–V1 chain, V3–V2–V3 chain, as depicted in Fig. 5a) with relatively weak interchain coupling. The strength of FM coupling is strongest between V ions within each dimer, second strongest between adjacent dimers on the same zigzag chain, and then weakest between neighboring chains. The above analysis is in agreement with our in-plane magnetic calculations according to which the zigzag AFM (i.e., intrachain FM order with interchain AFM coupling) is the metastable state, whose energy is only 4.8 meV V−1 higher than the ground FM state.
In the exfoliated LiV2S4 monolayer, the average valence of V is 3.5. In strongly correlated transition metal systems, analogous to the layered manganite La0.5Sr1.5MnO4,41 this non-integer valence induced electronic instability may lead to structural distortion and then be compensated by the distinct occupancies of subsequent ligand states, resulting in the spin, charge, and orbital ordering with lower system energy. While compared to the Mott transition in bulk LiVS2, the MIT in the LiV2S4 monolayer is more like a Peierls-assisted orbital selective Mott transition proposed in VO2.42
Footnote |
† Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d3cp04560a |
This journal is © the Owner Societies 2024 |