Issue 4, 2024

Fluorine-rich modification of self-extinguishable lithium-ion battery separators using cross-linking networks of chemically functionalized PVDF terpolymers for highly enhanced electrolyte affinity and thermal–mechanical stability

Abstract

Thermal runaway is of great interest for developing high-performance Li-ion batteries (LIBs) and is accelerated by melting a separator at the elevated temperature during the battery failure. Herein, we report a facile polymeric coating method for polypropylene (PP)-based separators (PPSs) that enhances thermal, mechanical, and electrochemical performances. A conceptually designed double bond-containing polyvinylidene fluoride terpolymer (DPVDF) was coated on PPSs (DPSs) employing a simple dip-coating method, followed by a cross-linking process for DPVDF (DPSX). The modulus of DPSX increased from 49.06 MPa (PPS) to 64.29 MPa. The thermal shrinkage area of DPSX decreased by less than 10% at 140 °C for 30 min, whereas PPSs showed a 31.2% shrinkage. High-temperature open-circuit voltage tests (140 °C) showed that LiFePO4 (LFP) half-cells with PPS and DPS were short-circuited after 10 and 40 min, respectively. However, the LFP cell with DPSX showed no voltage drops even after 2 h. Furthermore, electrolyte wetting was significantly enhanced for DPSs and DPSX compared to PPSs. Moreover, electrolyte uptake was also increased from 65.25% (PPS) to 196.63% (DPSX), which is attributed to the enhanced wettability and pore structure. The long-term cycling and rate capability values of the LFP half-cells assembled with DPS and DPSX were significantly higher than those of the LFP half-cell with PPSs, which is closely related to the reduced cell resistance owing to the interfacial affinity of DPSX. Lastly, it was found that the DPVDF coating granted self-extinguishing functions to the separator. Flame tests demonstrated that DPSs and DPSX were instantly extinguished within a second and retained more than 74.89% of their weight after burning tests, while PPSs lost more than 43.46% (dried) and 59.65% (wetted) of their weight.

Graphical abstract: Fluorine-rich modification of self-extinguishable lithium-ion battery separators using cross-linking networks of chemically functionalized PVDF terpolymers for highly enhanced electrolyte affinity and thermal–mechanical stability

Supplementary files

Article information

Article type
Paper
Submitted
14 Oct 2023
Accepted
19 Dec 2023
First published
19 Dec 2023

J. Mater. Chem. A, 2024,12, 2011-2023

Fluorine-rich modification of self-extinguishable lithium-ion battery separators using cross-linking networks of chemically functionalized PVDF terpolymers for highly enhanced electrolyte affinity and thermal–mechanical stability

J. Park, Y. J. Kwon, J. Yun, J. W. Bae, M. J. Lee, K. Zhang, S. H. Kim, K. Baeg, J. H. Lee and K. Y. Cho, J. Mater. Chem. A, 2024, 12, 2011 DOI: 10.1039/D3TA06261A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements