Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Blood-clotting model and simulation analysis of polyvinyl alcohol–chitosan composite hemostatic materials
Yifan
Zhao
ae,
Junhong
Hao
*b,
Zexin
Chen
c,
Mengmeng
Li
a,
Jianxun
Ren
c and
Xiaobing
Fu
d
aFourth Medical Center of PLA General Hospital, Beijing, 100048, China
bKey Laboratory of Power Station Energy Transfer Conversion and System of Ministry of Education, School of Energy Power and Mechanical Engineering, North China Electric Power University, Beijing 102206, China. E-mail: hjh@ncepu.edu.cn
cKey Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China
dWound Healing Unit, PLA General Hospital, Beijing, 100853, China
eDepartment of Anesthesiology, Medical School of Chinese PLA, Beijing 100853, China
First published on 25th October 2024
Abstract
Correction for ‘Blood-clotting model and simulation analysis of polyvinyl alcohol–chitosan composite hemostatic materials’ by Yifan Zhao et al., J. Mater. Chem. B, 2021, 9, 5465–5475, https://doi.org/10.1039/D1TB00159K.
The authors apologise for an error in Fig. 2a due to figure compilation. The corrected Fig. 2 is shown below.
 | ||
| Fig. 2 SEM images of the PVA, CS, and PVA–CSx sponges. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2024 |