Issue 9, 2025

Measuring interfacial strength of ultra-soft materials with needle-induced cavitation

Abstract

Needle-induced cavitation (NIC) has been used to characterize the mechanical properties of ultra-soft biological tissues. Previous studies conducted NIC on brain tissue and computed the energy to separate, or fracture, interfaces between regions from the measured NIC critical pressure. These tests revealed the intrinsic correlation between the critical pressure and the interfacial properties. While NIC demonstrated its potential for measuring interfacial properties, independent measurements have not been made to validate the measurements. In this work, we use model interfaces to validate the use of NIC to quantify the interfacial energy of buried interfaces. By inserting a needle into the interface and inducing pressurized separation, we obtained the critical pressure dependence on the needle size and a known residual stress. At the extrapolated residual stress-free state, we obtained the interfacial energy (Gc) by considering energy dissipated in the separation initiation at the critical pressure point, yielding a Gc value that matches an independent measurement.

Graphical abstract: Measuring interfacial strength of ultra-soft materials with needle-induced cavitation

Supplementary files

Article information

Article type
Paper
Submitted
13 Oct 2024
Accepted
22 Jan 2025
First published
29 Jan 2025

Soft Matter, 2025,21, 1662-1668

Measuring interfacial strength of ultra-soft materials with needle-induced cavitation

H. Fu and A. J. Crosby, Soft Matter, 2025, 21, 1662 DOI: 10.1039/D4SM01203H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements