Issue 3, 2003

Counting and sizing of particles and particle agglomerates in a microfluidic device using laser light scattering: application to a particle-enhanced immunoassay

Abstract

A microfluidic device for counting and sizing particles and particle agglomerates based on laser light scattering is demonstrated. The particles were confined hydrodynamically and passed through a focused laser beam. Scattering at two different angles, 15° and 45°, was detected. At an acquisition rate of 10 kHz, a throughput of 150 particles s−1 was achieved. Scattering intensity was found to depend on particle volume for 2 to 9 µm diameter particles. Size discrimination of particles with a diameter ratio of 1 : 2 was accomplished. In addition, the scattering signals of particle agglomerates formed in a particle-enhanced immunoassay for C-reactive protein (CRP) were measured. Scattering intensity was found to be dependent on the CRP concentration, 100 ng CRP per mL could be detected. The particle counting method presented is generic and can be employed in a wide variety of assays as well as for cell counting and particle counting.

Article information

Article type
Paper
Submitted
22 Jan 2003
Accepted
25 Apr 2003
First published
30 May 2003

Lab Chip, 2003,3, 187-192

Counting and sizing of particles and particle agglomerates in a microfluidic device using laser light scattering: application to a particle-enhanced immunoassay

N. Pamme, R. Koyama and A. Manz, Lab Chip, 2003, 3, 187 DOI: 10.1039/B300876B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements