Issue 5, 2008

Organic–inorganic hybrid materials for flexible optical waveguide applications

Abstract

Novel organic–inorganic hybrid materials of 3-acryloxypropyl trimethoxysilane and 4,4′-(hexafluoroisopropylidene)diphenol were synthesized by non-hydrolytic sol–gel processing. Thick, crack-free films were produced by spin-coating without high volume shrinkage during further treatment of the films. The optical properties of the materials were precisely tailored by adjusting the chemical composition of the materials. The tunability of the refractive index allowed us to fabricate step-index optical waveguide structures with well-defined and reproducible refractive index differences to within 0.001. The relatively large, negative thermo–optic coefficients (dn/dT, °C) were obtained in the temperature range below 100 °C and displayed a systematic decrease with the addition of the organic compounds. Using these hybrid materials, we fabricated a flexible optical waveguide based on a soft-lithography technique. The bending loss of a flexible waveguide array was measured and found to yield no significant loss above 2 mm diameter curvature. The transmission performance of each waveguide channel was tested using a 10 Gbps data stream. The electrical output signal from a photodetector, connected to a wide-band oscilloscope, displays a clear 10 Gbps eye pattern.

Graphical abstract: Organic–inorganic hybrid materials for flexible optical waveguide applications

Article information

Article type
Paper
Submitted
01 Oct 2007
Accepted
22 Nov 2007
First published
10 Dec 2007

J. Mater. Chem., 2008,18, 579-585

Organic–inorganic hybrid materials for flexible optical waveguide applications

Y. K. Kwon, J. K. Han, J. M. Lee, Y. S. Ko, J. H. Oh, H. Lee and E. Lee, J. Mater. Chem., 2008, 18, 579 DOI: 10.1039/B715111J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements