Issue 11, 2011

Influence of gold nanoparticle size (2–50 nm) upon its electrochemical behavior: an electrochemical impedance spectroscopic and voltammetric study

Abstract

The electrochemical behavior of different size gold nanoparticles (AuNPs) was investigated. AuNPs with 2, 5, 10, 15, 20 and 50 nm diameters were immobilized onto a screen printed carbon electrode surface by physical adsorption. The impedimetric response was measured for different diameter AuNPs at a fixed value of their surface area, at the same content of gold (Au) and at the same concentration. In a further experiment, the impedimetric response toward AuNP concentration was measured for each diameter. Impedimetric results were compared with results obtained for the detection of Au by stripping voltammetry. Additionally, variability of active surface area and roughness of different electrodes before and after immobilization of AuNPs were carefully evaluated by means of cyclic voltammetry and laser scanning microscopy. Electrochemical impedance spectroscopy (EIS) is a sensitive technique capable of differentiating the signal generated by AuNPs of different sizes, thus providing useful information for the employment of AuNPs in electrochemical biosensors.

Graphical abstract: Influence of gold nanoparticle size (2–50 nm) upon its electrochemical behavior: an electrochemical impedance spectroscopic and voltammetric study

Article information

Article type
Paper
Submitted
16 Jul 2010
Accepted
20 Dec 2010
First published
21 Jan 2011

Phys. Chem. Chem. Phys., 2011,13, 4980-4986

Influence of gold nanoparticle size (2–50 nm) upon its electrochemical behavior: an electrochemical impedance spectroscopic and voltammetric study

A. Bonanni, M. Pumera and Y. Miyahara, Phys. Chem. Chem. Phys., 2011, 13, 4980 DOI: 10.1039/C0CP01209B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements