Issue 3, 2013

Catalytic pyrolysis of microalgae for production of aromatics and ammonia

Abstract

We report an economically- and environmentally-promising microalgae biorefinery pathway, which uses catalytic pyrolysis with HZSM-5 catalyst to convert whole microalgae into aromatic hydrocarbons. This process produces valuable petrochemicals and ammonia, the latter of which can be recycled as a fertilizer for microalgae cultivation. We tested samples of lipid-lean green microalgae, Chlorella vulgaris, at various reaction temperatures and catalyst loads. We also tested samples of lignocellulosic biomass, red oak, for comparison. Our results demonstrated that catalytic pyrolysis of microalgae produces better aromatic yields and better aromatic distributions than catalytic pyrolysis of red oak. The maximum carbon yield of aromatics from microalgae was 24%, while that from red oak was 16.7%. Moreover, catalytic pyrolysis of microalgae produced more monocyclic aromatics than were produced by catalytic pyrolysis of lignocellulosic biomass. Microalgae present many advantages as a feedstock for biofuel. With the promise catalytic pyrolysis offers for solving some of microalgae's disadvantages, microalgae biorefineries move one step closer to economic and environmental feasibility.

Graphical abstract: Catalytic pyrolysis of microalgae for production of aromatics and ammonia

Supplementary files

Additions and corrections

Article information

Article type
Paper
Submitted
15 Jun 2012
Accepted
10 Jan 2013
First published
10 Jan 2013

Green Chem., 2013,15, 675-681

Catalytic pyrolysis of microalgae for production of aromatics and ammonia

K. Wang and R. C. Brown, Green Chem., 2013, 15, 675 DOI: 10.1039/C3GC00031A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements