Development of polyurethane–titania nanocomposites as dielectric and piezoelectric material
Abstract
Flexible polyurethane (PU)–titania nanocomposites of different compositions are prepared by a melt-mixing technique. Two different sequences of
* Corresponding authors
a
Rubber Technology Centre, Indian Institute of Technology, Kharagpur, W.B. 721302, India
E-mail:
khasdi@rtc.iitkgp.ernet.in
Fax: +91-3222282292
Tel: +91-3222283192
b Department of Chemistry, Indian Institute of Technology, Kharagpur, W.B. 721302, India
c Polymer-Nano Science and Technology, Chonbuk National University, Jeonju 561 756, Republic of Korea
Flexible polyurethane (PU)–titania nanocomposites of different compositions are prepared by a melt-mixing technique. Two different sequences of
S. Nayak, B. Sahoo, T. Kumar Chaki and D. Khastgir, RSC Adv., 2013, 3, 2620 DOI: 10.1039/C2RA22929C
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content