Issue 34, 2013

Investigation on microwave absorption properties of CuO/Cu2O-coated Ni nanocapsules as wide-band microwave absorbers

Abstract

CuO/Cu2O-coated Ni nanocapsules with Ni nanoparticles as cores and amorphous CuO/Cu2O as shells have been synthesized by the arc discharge method. The dielectric relaxation of the CuO/Cu2O shell and the interfacial relaxation between the CuO/Cu2O shell and the Ni core lead to dual nonlinear dielectric resonance. The natural resonance shifts to 5.4 GHz, due to the surface anisotropy of these Ni nanoparticles. The minimum reflection loss (RL) is less than −20 dB at 2.0–18.0 GHz with a thickness between 1.0 and 8.4 mm for paraffin–nanocapsule composites, comprising of 40 wt% Ni nanocapsules, and an optimal RL value of −47.8 dB was observed at 14.4 GHz on a specimen with a matching thickness of 1.20 mm. The frequency of the microwave absorption complies with the quarter-wavelength matching model. In the microwave S band, C band, X band and Ku band, these CuO/Cu2O-coated Ni nanocapsules can be used as excellent lightweight microwave absorbers due to the proper combination of complex permittivity and permeability and the special microstructure of the CuO/Cu2O-coated Ni nanocapsules.

Graphical abstract: Investigation on microwave absorption properties of CuO/Cu2O-coated Ni nanocapsules as wide-band microwave absorbers

Article information

Article type
Paper
Submitted
22 Feb 2013
Accepted
21 Jun 2013
First published
04 Jul 2013

RSC Adv., 2013,3, 14590-14594

Investigation on microwave absorption properties of CuO/Cu2O-coated Ni nanocapsules as wide-band microwave absorbers

X. Liu, C. Feng, S. W. Or, Y. Sun, C. Jin, W. Li and Y. Lv, RSC Adv., 2013, 3, 14590 DOI: 10.1039/C3RA40937F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements