Issue 36, 2013

Impact of oxidation on nanoparticle adhesion to carbon substrates

Abstract

Carbon supported platinum (Pt/C) catalysts are of vital importance to today's fine chemical industry. However, both Pt and its carbon support surface undergo oxidation during operation. There is a lack of information on how surface oxidation affects the durability of Pt/C catalysts. In this study, we report the impact of oxidation of Pt/C on the binding energy and nanoparticle adhesion force. Classic molecular dynamics simulations are performed on systems containing PtO nanoparticles of 4 nm and graphite surfaces oxidized with either epoxy or hydroxyl groups at several oxidation extents (10%, 25% and 50%). Appropriate for service in polymer electrolyte membrane fuel cells (PEMFC), the effect of a thin Nafion film (1 nm thick) at different hydration levels (λ = 3, 6, 9 and 15) is also included in the system to study the impact of oxidation on the interface structure of the electrolyte and the electrode. This study shows that the adhesion of both the Nafion film and the PtO nanoparticle is drastically affected by the type and degree of oxidation on the carbon surface. The oxidation with hydroxyl groups on the graphite surface enhanced the binding energy between the polymer electrolyte and the carbon electrode, while oxidation with the epoxy group beyond a certain amount caused delamination of the film. The adhesion of the PtO nanoparticle was similarly enhanced by the hydroxylated surface and diminished by the epoxidized surface. The binding energies and adhesive forces are reported for all systems studied.

Graphical abstract: Impact of oxidation on nanoparticle adhesion to carbon substrates

Article information

Article type
Paper
Submitted
06 Jun 2013
Accepted
24 Jun 2013
First published
24 Jun 2013

RSC Adv., 2013,3, 15792-15804

Impact of oxidation on nanoparticle adhesion to carbon substrates

Q. He, D. C. Joy and D. J. Keffer, RSC Adv., 2013, 3, 15792 DOI: 10.1039/C3RA42767F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements