Issue 17, 2013

Crumpled reduced graphene oxide–polyamidoamine dendrimer hybrid nanoparticles for the preparation of an electrochemical biosensor

Abstract

Reduced graphene nanoparticles were prepared from graphene oxide through a two-step covalent modification approach. Graphene oxide was first enriched with reactive epoxy groups by anchoring (3-glycidyloxypropyl)trimethoxysilane at the hydroxyl groups located on the nanocarbon basal plane. Modified graphene oxide was further cross-linked and partially reduced by treatment with the fourth-generation ethylenediamine core polyamidoamine G-4 dendrimer producing graphene nanoparticles with crumpled paper-like morphology. This graphene derivative was employed as a coating material for glassy carbon electrodes and the nanostructured electrode was tested for the preparation of electrochemical biosensors by immobilizing the enzyme tyrosinase through cross-linking with glutaraldehyde. This bioelectrode showed excellent electroanalytical behavior for catechol with a fast response in about 6 s, linear range of 10 nM to 22 μM, sensitivity of 424 mA M−1, and low detection limit of 6 nM. The enzyme biosensor also showed high stability when stored at 4 °C under dry and wet conditions.

Graphical abstract: Crumpled reduced graphene oxide–polyamidoamine dendrimer hybrid nanoparticles for the preparation of an electrochemical biosensor

Supplementary files

Article information

Article type
Paper
Submitted
20 Jan 2013
Accepted
01 Mar 2013
First published
01 Mar 2013

J. Mater. Chem. B, 2013,1, 2289-2296

Crumpled reduced graphene oxide–polyamidoamine dendrimer hybrid nanoparticles for the preparation of an electrochemical biosensor

E. Araque, R. Villalonga, M. Gamella, P. Martínez-Ruiz, J. Reviejo and J. M. Pingarrón, J. Mater. Chem. B, 2013, 1, 2289 DOI: 10.1039/C3TB20078G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements