Issue 77, 2014

Shear induced fabrication of intertwined single walled carbon nanotube rings

Abstract

Thin film microfluidic shearing of a mixture of toluene dispersed single walled carbon nanotubes (SWCNTs) and water in a vortex fluidic device results in SWCNT nanorings (and related structures), diameters 100 to 200 nm or 300 to 700 nm, for respectively 10 mm or 20 mm diameter rotating tubes.

Graphical abstract: Shear induced fabrication of intertwined single walled carbon nanotube rings

Supplementary files

Article information

Article type
Communication
Submitted
28 Apr 2014
Accepted
05 Jun 2014
First published
05 Jun 2014

Chem. Commun., 2014,50, 11295-11298

Author version available

Shear induced fabrication of intertwined single walled carbon nanotube rings

K. Vimalanathan, X. Chen and C. L. Raston, Chem. Commun., 2014, 50, 11295 DOI: 10.1039/C4CC03126A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements