Issue 36, 2014

High-performance fish-scale-based porous carbon for the removal of methylene blue from aqueous solution

Abstract

The adsorption of methylene blue (MB) from aquatic systems by the fish-scale-based hierarchical lamellar porous carbon (FHLC) was investigated. In this paper, the FHLC was used as an alternative adsorbent to replace the Norit CGP, a commercial activated carbon, and showed an overall fast and pH-dependent MB adsorption. The effect of contact time, pH and concentration on MB adsorption was investigated. It was found that the adsorption behaviours of FHLC and CGP could be described by a monolayer Langmuir type isotherm. The kinetic data followed the pseudo second-order kinetic model for both activated carbons as the linear correlation coefficients were all above 0.9999. Thermodynamic analyses indicated that the adsorption was an endothermic and spontaneous physisorption process. The maximum Langmuir adsorption capacity of the FHLC was 555.55 mg g−1 at pH = 7.07 and 1050.72 mg g−1 at pH = 11.00 while that of the CGP was 432.90 mg g−1 at pH = 7.07 and 649.35 mg g−1 at pH = 11.00, respectively. The adsorption capacity of the FHLC was much better than that of the CGP at different pH values. Our study shows that fish-scale-based carbon could be used as a high-performance and cost-effective adsorbent to remove MB in aqueous solution in the wastewater treatment.

Graphical abstract: High-performance fish-scale-based porous carbon for the removal of methylene blue from aqueous solution

Article information

Article type
Paper
Submitted
25 Jan 2014
Accepted
07 Apr 2014
First published
07 Apr 2014

RSC Adv., 2014,4, 18737-18743

Author version available

High-performance fish-scale-based porous carbon for the removal of methylene blue from aqueous solution

Z. Huang, H. Shao, B. Huang, C. Li, Y. Huang and X. Chen, RSC Adv., 2014, 4, 18737 DOI: 10.1039/C4RA00756E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements