Issue 66, 2014

Thermal analysis of aqueous urea ammonium nitrate alternative fuel

Abstract

The thermal decomposition of aqueous ammonium nitrate, aqueous urea and aqueous urea ammonium nitrate was investigated by means of simultaneous TGA/DTA/DTG/MS analysis under ambient pressure, and DSC under applied pressures of 5 and 10 MPa. Aqueous urea ammonium nitrate was previously suggested as a low carbon nitrogen-based alternative fuel. Investigation of the processes which occur in the condensed phase as the temperature increases is crucial in order to understand the combustion mechanism of the suggested alternative fuel. Isomerization of urea into ammonium cyanate as well as urea hydrolysis was inhibited in the presence of ammonium nitrate, hence the fuel is considered to be chemically stable at room temperature. No solid residuals remained above 315 °C. Thermal decomposition of the fuel under ambient pressure was found to involve four principal endothermic stages: (a) water vaporization, (b) urea decomposition along with biuret formation, (c) biuret decomposition, and (d) ammonium nitrate dissociation. The thermal decomposition of the fuel under isobaric conditions of 5 and 10 MPa revealed only an exothermic process with a sharp increase in the heat flow above 300 °C. The present research increases the basic understanding of the suggested nitrogen-based alternative fuel combustion process.

Graphical abstract: Thermal analysis of aqueous urea ammonium nitrate alternative fuel

Article information

Article type
Paper
Submitted
11 May 2014
Accepted
30 Jul 2014
First published
30 Jul 2014

RSC Adv., 2014,4, 34836-34848

Author version available

Thermal analysis of aqueous urea ammonium nitrate alternative fuel

A. G. Dana, G. E. Shter and G. S. Grader, RSC Adv., 2014, 4, 34836 DOI: 10.1039/C4RA04381B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements