Issue 33, 2014

Towards new generation fuel cell electrocatalysts based on xerogel–nanofiber carbon composites

Abstract

Xerogel–nanofiber carbon composites (XNCCs) have been easily synthesized by using a Ni catalyst supported on carbon xerogel (CXG), growing randomly oriented carbon nanofibers (CNFs) within the coralline-like structure of the xerogel (CXG). This novel composite combines the advantages of xerogel and fiber nanostructures. The interactions between these phases as well as their effect as a support on Pt electrocatalysts for the oxygen reduction reaction (ORR) have been investigated. Platinum catalysts supported on different XNCCs (varying in terms of CXG and CNF contents) as well as on bare CXG and CNFs have been synthesized using a microemulsion route. They have been characterized in terms of structure, morphology and porosity and investigated for the ORR in a half-cell configuration. The catalyst supported on the XNCC with a 44% CNF content shows the best electrochemical behavior. This catalyst formulation leads to a catalytic activity 5 times higher than that obtained on a Vulcan-based catalyst at low overpotential and 2.5 times higher at large overpotential. Accelerated degradation tests also show better stability for the composite support-based catalyst. Compared to bare CNF and CXG supports, a stabilization effect is envisaged by the presence of highly graphitic CNFs within the composite structure.

Graphical abstract: Towards new generation fuel cell electrocatalysts based on xerogel–nanofiber carbon composites

Article information

Article type
Paper
Submitted
28 Apr 2014
Accepted
16 Jun 2014
First published
17 Jun 2014

J. Mater. Chem. A, 2014,2, 13713-13722

Towards new generation fuel cell electrocatalysts based on xerogel–nanofiber carbon composites

D. Sebastián, C. Alegre, M. E. Gálvez, R. Moliner, M. J. Lázaro, A. S. Aricò and V. Baglio, J. Mater. Chem. A, 2014, 2, 13713 DOI: 10.1039/C4TA02108H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements