Issue 44, 2014

Carbon embedded α-MnO2@graphene nanosheet composite: a bifunctional catalyst for high performance lithium oxygen batteries

Abstract

Carbon is essential for the oxygen electrode in non-aqueous lithium–oxygen (Li–O2) batteries for improving the electron conductivity of the electrode. However, it also leads to some side reactions when exposed to the Li2O2 product and the electrolyte, limiting the round-trip efficiency and coulombic efficiency of the batteries. In this paper, a carbon-embedded α-MnO2@graphene nanosheet (α-MnO2@GN) composite is introduced as a highly effective catalyst for Li–O2 batteries. X-ray photoelectron spectroscopy (XPS) analysis showed that the Li2CO3 by-product was significantly reduced due to the isolation of carbon with the electrolyte and Li2O2. Thus, the composite could deliver a reversible capacity of ∼2413 mAh g−1 based on the total mass of the composite with an extremely high discharge voltage of ∼2.92 V (only 40 mV lower than the thermodynamic potential) and a low charge voltage of ∼3.72 V at a current density of 50 mA g−1. The round-trip efficiency is calculated to be ∼78% with a coulombic efficiency of almost 100%.

Graphical abstract: Carbon embedded α-MnO2@graphene nanosheet composite: a bifunctional catalyst for high performance lithium oxygen batteries

Supplementary files

Article information

Article type
Communication
Submitted
29 Aug 2014
Accepted
24 Sep 2014
First published
24 Sep 2014

J. Mater. Chem. A, 2014,2, 18736-18741

Author version available

Carbon embedded α-MnO2@graphene nanosheet composite: a bifunctional catalyst for high performance lithium oxygen batteries

Y. Cao, M. Zheng, S. Cai, X. Lin, C. Yang, W. Hu and Q. Dong, J. Mater. Chem. A, 2014, 2, 18736 DOI: 10.1039/C4TA04488F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements