Issue 35, 2015

Enhanced conductivity of (110)-textured ScSZ films tuned by an amorphous alumina interlayer

Abstract

Herein a novel strategy to tune the crystallite orientation and the ionic conductivity of solid electrolyte films through interfacial control has been reported. 10 mol% Sc2O3-doped ZrO2 (10ScSZ) thin films were prepared with an amorphous alumina (AO) interlayer (AO/10ScSZ) using magnetron sputtering. It has been found that a (110)-preferred orientation develops in AO/10ScSZ films annealed at 1000 °C due to a strong interfacial interaction, while 10ScSZ films deposited without the AO interlayer are (111)-textured. The (110)-oriented AO/10ScSZ films show an ionic conductivity nearly 4 times higher than that of the (111)-oriented 10ScSZ films. This is explained by the fact that the (110)-texture provides faster migration pathways with lower energy barrier for oxygen vacancies. These results reveal the relationship between the crystal structure and the conductivity of AO/ScSZ heterostructured films, which can facilitate the development of high-performance multilayered electrolytes and enable the miniaturization of solid-state electrochemical devices operable at temperatures below 600 °C.

Graphical abstract: Enhanced conductivity of (110)-textured ScSZ films tuned by an amorphous alumina interlayer

Supplementary files

Article information

Article type
Paper
Submitted
23 Jun 2015
Accepted
01 Aug 2015
First published
07 Aug 2015

Phys. Chem. Chem. Phys., 2015,17, 23034-23040

Enhanced conductivity of (110)-textured ScSZ films tuned by an amorphous alumina interlayer

L. Yao, G. Ou, H. Nishijima and W. Pan, Phys. Chem. Chem. Phys., 2015, 17, 23034 DOI: 10.1039/C5CP03631C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements