Issue 3, 2015

Design of low-cost ionic liquids for lignocellulosic biomass pretreatment

Abstract

The cost of ionic liquids (ILs) is one of the main impediments to IL utilization in the cellulosic biorefinery, especially in the pretreatment step. In this study, a number of ionic liquids were synthesized with the goal of optimizing solvent cost and stability whilst demonstrating promising processing potential. To achieve this, inexpensive feedstocks such as sulfuric acid and simple amines were combined into a range of protic ionic liquids containing the hydrogen sulfate [HSO4] anion. The performance of these ionic liquids was compared to a benchmark system containing the IL 1-ethyl-3-methylimidazolium acetate [C2C1im][OAc]. The highest saccharification yields were observed for the triethylammonium hydrogen sulfate IL, which was 75% as effective as the benchmark system. Techno-economic modeling revealed that this promising and yet to be optimized yield was achieved at a fraction of the processing cost. This study demonstrates that some ILs can compete with the cheapest pretreatment chemicals, such as ammonia, in terms of effectiveness and process cost, removing IL cost as a barrier to the economic viability of IL-based biorefineries.

Graphical abstract: Design of low-cost ionic liquids for lignocellulosic biomass pretreatment

Supplementary files

Article information

Article type
Paper
Submitted
29 Jun 2014
Accepted
08 Dec 2014
First published
08 Dec 2014

Green Chem., 2015,17, 1728-1734

Author version available

Design of low-cost ionic liquids for lignocellulosic biomass pretreatment

A. George, A. Brandt, K. Tran, S. M. S. N. S. Zahari, D. Klein-Marcuschamer, N. Sun, N. Sathitsuksanoh, J. Shi, V. Stavila, R. Parthasarathi, S. Singh, B. M. Holmes, T. Welton, B. A. Simmons and J. P. Hallett, Green Chem., 2015, 17, 1728 DOI: 10.1039/C4GC01208A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements