Issue 20, 2015

Flexible organic field-effect transistors with high-reliability gate insulators prepared by a room-temperature, electrochemical-oxidation process

Abstract

Flexible organic field-effect transistors (OFETs) with electrochemically oxidized gate insulators (AlOx:Nd) covered by a thin layer of hydroxyl-free poly(perfluorobutenylvinylether) known as Cytop were fabricated on a polyethylene naphthalate (PEN) substrate. The AlOx:Nd/Cytop bilayer insulator exhibited excellent insulating properties with low leakage current, high dielectric constant, high breakdown field, and low surface roughness. The pentacene film on AlOx:Nd without Cytop consisted of small grains, while the one on AlOx:Nd with Cytop exhibited a dendritic structure with a larger average grain size of ∼350 nm. The pentacene OFET with Cytop exhibited higher mobility (0.75 cm2 V−1 s−1) and better electrical stability under gate-bias-stress (in air condition) compared to that without Cytop. In addition, the flexible OFET was able to maintain a relatively stable performance under a certain degree of bending.

Graphical abstract: Flexible organic field-effect transistors with high-reliability gate insulators prepared by a room-temperature, electrochemical-oxidation process

Article information

Article type
Paper
Submitted
15 Dec 2014
Accepted
28 Jan 2015
First published
28 Jan 2015

RSC Adv., 2015,5, 15695-15699

Author version available

Flexible organic field-effect transistors with high-reliability gate insulators prepared by a room-temperature, electrochemical-oxidation process

S. Sun, L. Lan, P. Xiao, Z. Lin, H. Xu, M. Xu and J. Peng, RSC Adv., 2015, 5, 15695 DOI: 10.1039/C4RA16409A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements