Issue 56, 2015

Microwave-assisted in situ synthesis of reduced graphene oxide/Mn3O4 composites for supercapacitor applications

Abstract

Reduced graphene oxide/Mn3O4 (GM) composites were prepared by a simple and convenient strategy, that is, microwave irradiation of the hydrothermal product of reduced graphene oxide–Mn(NO3)2 mixtures. Mn3O4 nanoparticles with sizes of 20–50 nm were uniformly distributed on the surface of reduced graphene oxides. The GM composites exhibited good electrochemical performance with a specific capacitance of 344.8 F g−1 at the discharge current density of 1 A g−1 using 5 M NaOH as the electrolyte. The energy density of the GM composites was as high as 47.8 W h kg−1 with a power density of 1000 W kg−1. After 5000 cycles of charge/discharge experiments, a high level retaining specific capacitance of 342.1 F g−1 was obtained with 99.2% retention of the initial capacitance at 1 A g−1 and the equivalent series resistance of the GM composites system was much lower than that of pure Mn3O4. Therefore, the GM composites with large capacitance, good cycling performance and reversibility can be used as a promising electrode material for supercapacitor applications.

Graphical abstract: Microwave-assisted in situ synthesis of reduced graphene oxide/Mn3O4 composites for supercapacitor applications

Article information

Article type
Paper
Submitted
03 Apr 2015
Accepted
13 May 2015
First published
14 May 2015

RSC Adv., 2015,5, 45061-45067

Author version available

Microwave-assisted in situ synthesis of reduced graphene oxide/Mn3O4 composites for supercapacitor applications

H. Zhang, Z. Huang, Y. Li, Y. Chen, W. Wang, Y. Ye and P. Deng, RSC Adv., 2015, 5, 45061 DOI: 10.1039/C5RA05946A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements