Issue 78, 2015

Investigation of the difference in liquid superlubricity between water- and oil-based lubricants

Abstract

In the present work, we show that the liquid superlubricity (μ < 0.01) of water-based lubricants can be achieved between sapphire/sapphire even when the average contact pressure is higher than 100 MPa, while the superlubricity of oil-based lubricants cannot be achieved with the same contact pressure. However, when the pressure is reduced to 50 MPa, the friction coefficient of oil-based lubricants can translate from non-superlubricity (μ > 0.01) to superlubricity while the friction coefficient of water-based lubricants is always in the superlubricity region. The calculated friction results indicate that the liquid superlubricity is closely linked to pressure and the pressure–viscosity coefficient. When the pressure is high, the pressure–viscosity coefficient has to be as small as possible to achieve superlubricity, but when the pressure is low, superlubricity can be achieved with a wide range of pressure–viscosity coefficients. Finally, the liquid superlubricity region dependent on pressure and the pressure–viscosity coefficient were established, which are useful for us to design liquid superlubricity systems.

Graphical abstract: Investigation of the difference in liquid superlubricity between water- and oil-based lubricants

Article information

Article type
Paper
Submitted
08 Jun 2015
Accepted
02 Jul 2015
First published
02 Jul 2015

RSC Adv., 2015,5, 63827-63833

Investigation of the difference in liquid superlubricity between water- and oil-based lubricants

J. Li, C. Zhang, M. Deng and J. Luo, RSC Adv., 2015, 5, 63827 DOI: 10.1039/C5RA10834A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements