Issue 1, 2016

Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices

Abstract

Bonding of polymer-based microfluidics to polymer substrates still poses a challenge for Lab-On-a-Chip applications. Especially, when sensing elements are incorporated, patterned deposition of adhesives with curing at ambient conditions is required. Here, we demonstrate a fabrication method for fully printed microfluidic systems with sensing elements using inkjet and stereolithographic 3D-printing.

Graphical abstract: Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices

Supplementary files

Article information

Article type
Technical Innovation
Submitted
30 Sep 2015
Accepted
26 Nov 2015
First published
26 Nov 2015

Lab Chip, 2016,16, 70-74

Author version available

Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices

E. M. Hamad, S. E. R. Bilatto, N. Y. Adly, D. S. Correa, B. Wolfrum, M. J. Schöning, A. Offenhäusser and A. Yakushenko, Lab Chip, 2016, 16, 70 DOI: 10.1039/C5LC01195G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements