Issue 22, 2016

Synthesis and characterization of protic ionic liquids as thermoelectrochemical materials

Abstract

This unique work reports on the thermoelectrochemical potential of protic ionic liquid (PIL)-based electrolytes coupled with the I/I3 redox couple. Two series of protic ionic liquids based on secondary and/or tertiary ammonium cations with the trifluoroacetate, methanesulfonate, trifluoromethanesulfonate and tosylate anions were synthesized for thermoelectrochemical cells. The complete study on PILs was carried out to determine the nature and efficiency for the generation of voltage through the electrochemical effect. The investigation was executed in a temperature range between room temperature and 90 °C. PILs show lower thermal conductivity and good ionic conductivity which leads to the success of good thermoelectric materials. The outcome was positive as our proposed PILs showed higher Se values of 420 μV K−1 obtained for TEHA TFMS than the reported values of the same I/I3 redox couple. The most favorable thermoelectric figure of merit value (949.46 × 10−6) was achieved by BEHA TFMS. The power and the current output of the studied PILs are higher than those of some aprotic ionic liquids (AILs) reported.

Graphical abstract: Synthesis and characterization of protic ionic liquids as thermoelectrochemical materials

Supplementary files

Article information

Article type
Paper
Submitted
23 Nov 2015
Accepted
01 Feb 2016
First published
02 Feb 2016

RSC Adv., 2016,6, 18266-18278

Author version available

Synthesis and characterization of protic ionic liquids as thermoelectrochemical materials

T. A. Siddique, S. Balamurugan, S. M. Said, N. A. Sairi and W. M. D. W. Normazlan, RSC Adv., 2016, 6, 18266 DOI: 10.1039/C5RA24835C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements