Issue 47, 2016

Preparation of Sn-doped CuAlS2 films with an intermediate band and wide-spectrum solar response

Abstract

As a member of Cu-containing chalcopyrites, CuAlS2 is a promising candidate material for intermediate band solar cells (IBSCs). In this paper, the intermediate band mechanism of Sn doped CuAlS2 was investigated both theoretically and experimentally, and the two sub-bandgaps were measured to be 1.91 eV and 1.31 eV, respectively. A novel and convenient method of Electrophoretic Deposition (EPD) was utilized to prepare Sn doped CuAlS2 films. Due to the wide-spectrum of absorption introduced by the intermediate band, Sn doped CuAlS2 films showed better photoelectrochemical performance (PEC).

Graphical abstract: Preparation of Sn-doped CuAlS2 films with an intermediate band and wide-spectrum solar response

Supplementary files

Article information

Article type
Paper
Submitted
12 Jan 2016
Accepted
08 Apr 2016
First published
19 Apr 2016

RSC Adv., 2016,6, 40806-40810

Preparation of Sn-doped CuAlS2 films with an intermediate band and wide-spectrum solar response

C. Guo, C. Yang, Y. Xie, P. Chen, M. Qin, R. Huang and F. Huang, RSC Adv., 2016, 6, 40806 DOI: 10.1039/C6RA00946H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements