Issue 50, 2016, Issue in Progress

Graphene oxide with zinc partially substituted magnetite (GO–Fe1−xZnxOy) for the UV-assisted heterogeneous Fenton-like reaction

Abstract

A series of graphene oxide (GO) and zinc partially substituted magnetite GO–Fe1−xZnxOy (0 ≤ x ≤ 0.285) catalysts were synthesised through a precipitation-oxidation method. The rate constants for the degradation of acid orange seven (AO7) proceeded at a significant faster rate under UV-irradiation (up to 670%) than the conventional heterogeneous Fenton-like reaction. The resultant catalysts were mesoporous, so there was no mass transfer limitation for AO7 to access active sites in the catalysts. Further, maximum increases of rate constant up to 220% occurred as the zinc molar concentration increased from x = 0 to x = 0.159. GO enhanced to incorporation of zinc into the combined metal oxide, whilst zinc limited crystal growth, thus forming smaller crystallite sizes. These features proved to be essential for the improved catalytic activity of the resultant catalysts. The optimised zinc molar value at x = 0.159 delivered the best catalytic activity.

Graphical abstract: Graphene oxide with zinc partially substituted magnetite (GO–Fe1−xZnxOy) for the UV-assisted heterogeneous Fenton-like reaction

Supplementary files

Article information

Article type
Paper
Submitted
15 Feb 2016
Accepted
28 Apr 2016
First published
29 Apr 2016

RSC Adv., 2016,6, 44749-44757

Graphene oxide with zinc partially substituted magnetite (GO–Fe1−xZnxOy) for the UV-assisted heterogeneous Fenton-like reaction

N. A. Zubir, J. Motuzas, C. Yacou, X. Zhang and J. C. Diniz da Costa, RSC Adv., 2016, 6, 44749 DOI: 10.1039/C6RA04068C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements