Issue 20, 2016

Lead-free SnTe-based thermoelectrics: enhancement of thermoelectric performance by doping with Gd/Ag

Abstract

SnTe, with the same rock-salt structure as PbTe, is a potentially attractive thermoelectric material. Pristine SnTe has poor thermoelectric performance because of its very high hole concentration resulting from intrinsic Sn vacancies, which leads to a high thermal conductivity and a low Seebeck coefficient. In this work, the thermoelectric properties of SnTe were modified by doping with different contents of gadolinium and silver. It is found that SnTe doped with optimal gadolinium (i.e. Gd0.06Sn0.94Te) exhibited extraordinarily low lattice thermal conductivity that is close to the theoretical minimum. The drastic reduction of lattice thermal conductivity is attributed to the formation of nanoprecipitates, which strongly scatter phonons by mass fluctuation between a second phase and matrix coupled with mesoscale scattering via grain boundaries. Further doping Gd0.06Sn0.94Te with Ag leads to a higher Seebeck coefficient due to the decreased carrier concentration and adjusted phase composition. Optimal Ag doping leads to a 3 times and 2 times enhancement of the figure of merit (ZT) in comparison with SnTe and Gd0.06Sn0.94Te, respectively, i.e. a ZT of ∼1.1 was obtained for 11 atom% Ag-containing Gd0.06Sn0.94Te at 873 K.

Graphical abstract: Lead-free SnTe-based thermoelectrics: enhancement of thermoelectric performance by doping with Gd/Ag

Supplementary files

Article information

Article type
Paper
Submitted
08 Mar 2016
Accepted
18 Apr 2016
First published
20 Apr 2016

J. Mater. Chem. A, 2016,4, 7936-7942

Lead-free SnTe-based thermoelectrics: enhancement of thermoelectric performance by doping with Gd/Ag

L. Zhang, J. Wang, Z. Cheng, Q. Sun, Z. Li and S. Dou, J. Mater. Chem. A, 2016, 4, 7936 DOI: 10.1039/C6TA01994C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements