Issue 43, 2016

Light-weight functional layer on a separator as a polysulfide immobilizer to enhance cycling stability for lithium–sulfur batteries

Abstract

A light-weight boron-functionalized reduced graphene oxide (B-rGO) layer (only 0.2–0.3 mg cm−2) coated on a separator is demonstrated to improve the cycling stability and rate performance of lithium–sulfur batteries. Such an enhanced performance is ascribed to: (i) the boron species in B-rGO can enhance the binding with polysulfides, which helps suppress the shuttle reactions, thus alleviating overcharge and self-discharge; (ii) a certain amount of the boron doped into the graphene matrix can improve the electrical conductivity of the coating layer, thus enhancing the utilization of sulfur and improving the rate performance of the cells. With the B-rGO coated separator, the severe self-discharge of Li–S batteries can be alleviated. More importantly, for the high sulfur loading cathodes (above 4.5 mg cm−2), an improved high areal capacity of 4.71 mA h cm−2 can be achieved using the B-rGO coated separator. The above results demonstrate the potential of the B-rGO coated separator for practical lithium–sulfur batteries, and such a strategy can be extended to other energy storage systems.

Graphical abstract: Light-weight functional layer on a separator as a polysulfide immobilizer to enhance cycling stability for lithium–sulfur batteries

Supplementary files

Article information

Article type
Paper
Submitted
30 Jul 2016
Accepted
05 Oct 2016
First published
05 Oct 2016

J. Mater. Chem. A, 2016,4, 17033-17041

Light-weight functional layer on a separator as a polysulfide immobilizer to enhance cycling stability for lithium–sulfur batteries

F. Wu, J. Qian, R. Chen, Y. Ye, Z. Sun, Y. Xing and L. Li, J. Mater. Chem. A, 2016, 4, 17033 DOI: 10.1039/C6TA06516C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements