Issue 5, 2016

The p-type Mg2LixSi0.4Sn0.6 thermoelectric materials synthesized by a B2O3 encapsulation method using Li2CO3 as the doping agent

Abstract

This paper presents a facile synthetic procedure for p-type Mg2Si0.4Sn0.6 thermoelectric material. The B2O3 encapsulation method was used for synthesis, and Li2CO3 was used as the doping agent. These samples showed electrical conductivities and Seebeck coefficients comparable to samples doped with pure Li, but the MgO produced during the carbonate reaction had significant influence on the lattice thermal conductivity of the materials. A peak ZT ∼ 0.7 was obtained in the Mg2Li0.025Si0.4Sn0.6 sample.

Graphical abstract: The p-type Mg2LixSi0.4Sn0.6 thermoelectric materials synthesized by a B2O3 encapsulation method using Li2CO3 as the doping agent

Supplementary files

Article information

Article type
Paper
Submitted
06 Nov 2015
Accepted
24 Dec 2015
First published
24 Dec 2015

J. Mater. Chem. C, 2016,4, 929-934

The p-type Mg2LixSi0.4Sn0.6 thermoelectric materials synthesized by a B2O3 encapsulation method using Li2CO3 as the doping agent

P. Gao, J. D. Davis, V. V. Poltavets and T. P. Hogan, J. Mater. Chem. C, 2016, 4, 929 DOI: 10.1039/C5TC03692E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements