Issue 1, 2017

Carbon-doped freestanding TiO2 nanotube arrays in dye-sensitized solar cells

Abstract

Dye-sensitized solar cells (DSSCs) were fabricated with both closed- and open-ended freestanding TiO2 nanotube arrays that were doped with carbon via chemical vapor deposition to improve their electron transport properties. The energy conversion efficiencies of DSSCs increased from 5.07% to 6.21% after doping with a small amount of carbon, i.e., an enhancement of 22.4%. This suggests that the π–π conjugation introduced by carbon doping improved the efficiency of electron transport. However, energy conversion efficiencies of DSSCs with a large amount of carbon doping on the TiO2 nanotube arrays decreased from 5.07% to 2.87%, with a lower short-circuit current, open circuit voltage, and fill factor because of the reduced level of dye adsorption on the TiO2 nanotube arrays.

Graphical abstract: Carbon-doped freestanding TiO2 nanotube arrays in dye-sensitized solar cells

Supplementary files

Article information

Article type
Paper
Submitted
22 Aug 2016
Accepted
18 Nov 2016
First published
21 Nov 2016

New J. Chem., 2017,41, 285-289

Carbon-doped freestanding TiO2 nanotube arrays in dye-sensitized solar cells

W. Rho, H. Kim, H. Kim, J. S. Suh and B. Jun, New J. Chem., 2017, 41, 285 DOI: 10.1039/C6NJ02615J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements