Issue 9, 2017, Issue in Progress

La1−xAgxMnO3 electrocatalyst with high catalytic activity for oxygen reduction reaction in aluminium air batteries

Abstract

The LaMnO3 (LMO) perovskite catalyst has been proposed as one of the best oxygen reduction reaction catalysts (ORRCs) to substitute noble metals. However, its ORR catalytic activity needs to be further improved. Here, La1−xAgxMnO3 (LAM) perovskites doped with Ag are synthesized by a facile improved sol–gel method. The structures, morphologies and valence states of Mn and oxygen adsorption behaviors of these LAM samples are characterized, and their catalytic activities toward ORR are studied by the rotating ring-disk electrode (RRDE) and aluminum air battery technologies. The results demonstrate that the doping of 30% Ag in the A-site of LMO (LAM-30) can effectively improve its ORR catalytic activity due to the regulation of the manganese valence and improvement of the oxygen adsorption capacity. Besides the remarkable ORR catalytic activity, the LAM-30 catalyst exhibits good durability. The current retention is as high as 98% after the aging test for 10 000 seconds. In addition, the maximum power density of the aluminum air battery using LAM-30 as the ORRC can reach 230.2 mW cm−2, which indicates that LAM-30 can be used as a promising ORRC in aluminum air batteries.

Graphical abstract: La1−xAgxMnO3 electrocatalyst with high catalytic activity for oxygen reduction reaction in aluminium air batteries

Article information

Article type
Paper
Submitted
14 Oct 2016
Accepted
30 Nov 2016
First published
17 Jan 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 5214-5221

La1−xAgxMnO3 electrocatalyst with high catalytic activity for oxygen reduction reaction in aluminium air batteries

Y. Xue, H. Miao, S. Sun, Q. Wang, S. Li and Z. Liu, RSC Adv., 2017, 7, 5214 DOI: 10.1039/C6RA25242G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements