Issue 59, 2017, Issue in Progress

Selective and confined growth of transition metal dichalcogenides on transferred graphene

Abstract

We demonstrate confinement of CVD grown MoS2 to a patterned graphene area, forming a vertically stacked 2D heterostructure. The CVD-grown graphene had been transferred onto a Si wafer and patterned using photolithography. Raman mapping and spectral analysis reveal few-layer MoS2 grew selectively on graphene regions, and not on the surrounding SiO2 substrate surface. We also report CVD growth of WS2 directly on transferred graphene. Unlike MoS2, no few-layer regions were found; the WS2 was found to be either monolayer or at least five layers (bulk). The WS2 coverage was only partial, but selectivity to graphene is apparent. These findings have the potential to significantly advance fabrication of vertical 2D heterostructures and related devices, and suggest the selective growth on graphene may be applicable to TMDCs in general.

Graphical abstract: Selective and confined growth of transition metal dichalcogenides on transferred graphene

Supplementary files

Article information

Article type
Paper
Submitted
14 Jul 2017
Accepted
19 Jul 2017
First published
27 Jul 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 37310-37314

Selective and confined growth of transition metal dichalcogenides on transferred graphene

F. Lu, A. Karmakar, S. Shahi and E. Einarsson, RSC Adv., 2017, 7, 37310 DOI: 10.1039/C7RA07772F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements