Issue 10, 2017

A nonlinear dynamical system approach for the yielding behaviour of a viscoplastic material

Abstract

A nonlinear dynamical system model that approximates a microscopic Gibbs field model for the yielding of a viscoplastic material subjected to varying external stresses recently reported in R. Sainudiin, M. Moyers-Gonzalez and T. Burghelea, Soft Matter, 2015, 11(27), 5531–5545 is presented. The predictions of the model are in fair agreement with microscopic simulations and are in very good agreement with the micro-structural semi-empirical model reported in A. M. V. Putz and T. I. Burghelea, Rheol. Acta, 2009, 48, 673–689. With only two internal parameters, the nonlinear dynamical system model captures several key features of the solid–fluid transition observed in experiments: the effect of the interactions between microscopic constituents on the yield point, the abruptness of solid–fluid transition and the emergence of a hysteresis of the micro-structural states upon increasing/decreasing external forces. The scaling behaviour of the magnitude of the hysteresis with the degree of the steadiness of the flow is consistent with previous experimental observations. Finally, the practical usefulness of the approach is demonstrated by fitting a rheological data set measured with an elasto-viscoplastic material.

Graphical abstract: A nonlinear dynamical system approach for the yielding behaviour of a viscoplastic material

Article information

Article type
Paper
Submitted
18 Oct 2016
Accepted
06 Feb 2017
First published
07 Feb 2017

Soft Matter, 2017,13, 2024-2039

A nonlinear dynamical system approach for the yielding behaviour of a viscoplastic material

T. Burghelea, M. Moyers-Gonzalez and R. Sainudiin, Soft Matter, 2017, 13, 2024 DOI: 10.1039/C6SM02361D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements