Issue 21, 2017

Low band-gap conjugated polymer based on diketopyrrolopyrrole units and its application in organic photovoltaic cells

Abstract

A new conjugated polymer utilizing diketopyrrolopyrrole (DPP) and benzo[1,2-c:4,5-c′]dithiophene-4,8-dione (BDD) units as the backbone framework was designed, synthesized, and applied in polymer solar cells. A high efficiency of 9.18% was obtained using phenyl-C71-butyric acid methyl ester (PC71BM) as acceptor, which was among the best results obtained for DPP-based photovoltaic polymers. Absorption spectra indicated that the new polymer exhibits a narrow optical band-gap and strong aggregation behavior in the solution state. It was found that by dissolving the donor and acceptor in different solvents and then mixing them before film casting, better performing solar cell devices and distinct film morphology could be achieved, rather than by dissolution in one solvent. Small-angle neutron scattering (SANS) profiles showed that PC71BM in solution impaired polymer aggregate formation, because of its favorable interaction with the polymer chain. This study demonstrated the importance of manipulating the aggregation state in bulk heterojunction solar cell fabrication and revealed the influence of polymer-fullerene interplay on the blend film morphology.

Graphical abstract: Low band-gap conjugated polymer based on diketopyrrolopyrrole units and its application in organic photovoltaic cells

Supplementary files

Article information

Article type
Paper
Submitted
09 Feb 2017
Accepted
28 Apr 2017
First published
29 Apr 2017

J. Mater. Chem. A, 2017,5, 10416-10423

Low band-gap conjugated polymer based on diketopyrrolopyrrole units and its application in organic photovoltaic cells

H. Zhang, S. Zhang, K. Gao, F. Liu, H. Yao, B. Yang, C. He, T. P. Russell and J. Hou, J. Mater. Chem. A, 2017, 5, 10416 DOI: 10.1039/C7TA01250K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements