Issue 28, 2018

ATR-FTIR spectroscopy with equidistant combination PLS method applied for rapid determination of glycated hemoglobin

Abstract

A rapid quantification method of glycated hemoglobin (HbA1c) is proposed based on ATR-FTIR spectroscopy in human hemolysate samples. HbA1c, a major clinical diagnostic indicator of diabetes, is a relative content indicator, which was indirectly determined by determining the hemoglobin (Hb) and absolute HbA1c content (Hb·HbA1c) using ATR-FTIR spectroscopy. The equidistant combination partial least squares (EC-PLS) method was employed in wavelength selection to improve the modeling performance. Modeling samples were divided into calibration and prediction sets 50 times repeatedly to increase the model stability. For Hb and Hb·HbA1c, 90 and 198 wavenumbers were screened out by EC-PLS, respectively. The predicted values of HbA1c were calculated based on the predicted Hb and Hb·HbA1c values. The root-mean-square errors (RMSEP) and correlation coefficients of prediction (RP) were 5.9 g L−1 and 0.945 for Hb, 1.32 g L−1 and 0.931 for Hb·HbA1c, and 0.67% and 0.918 for HbA1c, respectively, for the validation samples. The results indicated the feasibility of quantification of HbA1c with ATR-FTIR spectroscopy. This method is simpler and quicker than conventional methods. Thus, this process is a potential diabetes screening tool in large populations.

Graphical abstract: ATR-FTIR spectroscopy with equidistant combination PLS method applied for rapid determination of glycated hemoglobin

Article information

Article type
Paper
Submitted
18 Apr 2018
Accepted
10 Jun 2018
First published
28 Jun 2018

Anal. Methods, 2018,10, 3455-3461

ATR-FTIR spectroscopy with equidistant combination PLS method applied for rapid determination of glycated hemoglobin

Y. Han, T. Pan, H. Zhou and R. Yuan, Anal. Methods, 2018, 10, 3455 DOI: 10.1039/C8AY00862K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements